My Orders
AD4 - Overview
Models starting with AD4
Click on the best match to narrow your results.
- AD4 Mr Coffee Coffee Maker (Coffee Maker)
- AD401J0 Whirlpool Dehumidifier
- AD40DBK0 Whirlpool Dehumidifier
- AD40DSL0 Whirlpool Dehumidifier
- AD40DSL1 Whirlpool Dehumidifier
- AD40DSL3 Whirlpool Dehumidifier
- AD40DSL4 Whirlpool Dehumidifier
- AD40DSL5 Whirlpool Dehumidifier
- AD40DSR0 Whirlpool Dehumidifier
- AD40DSR1 Whirlpool Dehumidifier
- AD40G1 Whirlpool Dehumidifier
- AD40G2 Whirlpool Dehumidifier
- AD40J0 Whirlpool Dehumidifier
- AD40J1 Whirlpool Dehumidifier
- AD40J2 Whirlpool Dehumidifier
- AD40LBK0 Whirlpool Dehumidifier
- AD40LJ0 Whirlpool Dehumidifier
- AD40LJ2 Whirlpool Dehumidifier
- AD40TH0 Whirlpool Dehumidifier
- AD40TJ0 Whirlpool Dehumidifier
- AD40TJ1 Whirlpool Dehumidifier
- AD40USL1 Whirlpool Dehumidifier
- AD40USL3 Whirlpool Dehumidifier
- AD40USL4 Whirlpool Dehumidifier
- AD40USL5 Whirlpool Dehumidifier
- AD40USR0 Whirlpool Dehumidifier
- AD40USR1 Whirlpool Dehumidifier
- AD418DSG1 General Electric Air Conditioner (Room)
- AD41G0 Whirlpool Dehumidifier
- AD423DSB1 General Electric Air Conditioner (Room)
- AD423DTX1 General Electric Air Conditioner (Room)
- AD479B DeLonghi Toaster Oven (Toaster Oven)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Dehumidifier Float
Part #WP1172075
If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete th...Read moreis repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.
Read less
$8.55
Special Order
Range Hex Nut
Part #WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Read less
$26.40
In Stock
Dishwasher Hose Clamp Kit
Part #WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from le...Read moreaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.
Read less
No Longer Available
Bucket and Float Kit
Part #8201783
This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moisture from the air, which dehumidifies your room. The kit contains one bucket, one flat, and two screws for installation. The bucket is white and made of plastic. ...Read moreYou may need to replace this part if your dehumidifier is no longer trapping the water properly. This is an authentic part from the genuine manufacturer, and you cannot order the parts individually.
Read less
$7.47
In Stock
Refrigerator Single Hex Head Screw
Part #WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
No Longer Available
Dehumidifier Humidistat Control
Part #WP1168670
The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature properly. For this repair, screwdrivers are the only tools needed. First remove the knob and the screws from the top. Pry back the plastic ret...Read moreainers on one side of the old humidistat and remove wires before installing the new part and reattaching the two wires that connect to it. Remember to unplug the humidifier from the power source before installation.
Read less
$7.47
In Stock
$65.73
Special Order
Bucket Water Level Switch
Part #1188814
This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it. You will need to perform a continuity test. This will determine if a continual electrical path is present. If you notice that dehumidifier...Read more will not run even when the bucket is empty, it might be due to the switch needing to be replaced. To access the part, you will need to remove all the outer housing. The switch is located in a plastic holder found on the inside wall.
Read less
No Longer Available
$35.80
Special Order
Screw - Package of 12
Part #WZ4X345D
$149.81
Special Order
No Longer Available
Bi-Metal Thermostat Control with Clamp
Part #1168777
Also known as Dehumidifier anti-icing thermostat with clamp.
Common Symptoms of models starting with AD4
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More