Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AD25J3

AD25J3 Whirlpool Dehumidifier - Overview

Get Parts and Repair Help for AD25J3

If you know the dehumidifier repair part you need, you can browse the list of all parts on the AD25J3, or you can search by name or part description. You can also find your part by where it is located on the AD25J3 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AD25J3

[Viewing 3 of 3]

Manuals & Care Guides for AD25J3

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.67

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$2.96

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$4.12

Float

If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it sho...

$69.19

Bucket and Float Kit

This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moisture from the air, which dehumidifies your room. The kit contains one bucket, one flat, and two screws for installation. The bucket is white and made of plastic. You may need to replace this part if your dehumidifier is no longer trapping the water properly. This is an authentic part from the genuine manufacturer, and you cannot order the parts individually.

$4.88

TIE-WIRE

$4.69

Float Clip

The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip keeps it in place. The float makes sure the water level is balanced and does not over flow. This float triggers the flow switch to shut off. If there is a defect with the clip, it can be a safety hazard as it might not be able to detect and stop an overflow. Make sure to unplug the dehumidifier from the power source before starting this replacement project as a safety precaution.

$58.12

Bucket Water Level Switch

This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed j...

Castor

Also known as wheel or roller. This part is sold individually.

PAN-DRAIN

HUMIDISTAT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the dehumidifier was not shutting off when water level was full

  • Customer: Steven from Owings Mills, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 6 people found this instruction helpful
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy read more

float was missing

  • Customer: barbra from STERLING HTS, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
pried off the plastic fastener with flat blade screw driver set new float in place then pressed plastic fastener back in place read more

Broken Floar Arm

  • Customer: Stephen from University City, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 1 of 6 people found this instruction helpful
Cut off Clips. Replace Float. Replace Clips read more