Models > AD25BSR0

AD25BSR0 Whirlpool Dehumidifier - Overview

Sections of the AD25BSR0

[Viewing 3 of 3]

Manuals & Care Guides for AD25BSR0

Click to download
Keep searches simple, eg. "belt" or "pump".
Float – Part Number: WP1172075
Float
★★★★★
★★★★★
(5)
PartSelect #: PS11738360
Manufacturer #: WP1172075
If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. Thi...
$8.06
  In Stock
Hex Nut – Part Number: WP488130
Hex Nut
★★★★★
★★★★★
(2)
PartSelect #: PS11742711
Manufacturer #: WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air cond...
$9.58
  In Stock
Bucket and Float Kit – Part Number: 8201783
Bucket and Float Kit
PartSelect #: PS1486706
Manufacturer #: 8201783
This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moisture from the air, whi...
  No Longer Available
Single Hex Head Screw – Part Number: WP489069
Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$5.43
  In Stock
Humidistat Control – Part Number: WP1168670
Humidistat Control
★★★★★
★★★★★
(1)
PartSelect #: PS11738359
Manufacturer #: WP1168670
The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature pr...
$81.24
  In Stock
Screw – Part Number: WP3196557
Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.77
  In Stock
Bucket Water Level Switch – Part Number: 1188814
Bucket Water Level Switch
★★★★★
★★★★★
(1)
PartSelect #: PS992307
Manufacturer #: 1188814
This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it...
$102.97
  In Stock
Float Clip – Part Number: 1186430
Float Clip
PartSelect #: PS731794
Manufacturer #: 1186430
Sold individually.
  No Longer Available
Fan Motor – Part Number: 4389130
Fan Motor
PartSelect #: PS557949
Manufacturer #: 4389130
This fan motor controls the circulating fan in the dehumidifier.
$276.79
  Special Order
Zip Tie – Part Number: WPW10339879
Zip Tie
PartSelect #: PS11753208
Manufacturer #: WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly t...
$8.06
  In Stock
Castor – Part Number: 1164241
Castor
PartSelect #: PS318954
Manufacturer #: 1164241
Also known as wheel or roller. This part is sold individually.
  No Longer Available
PAN-DRAIN – Part Number: 1168761
PAN-DRAIN
PartSelect #: PS319573
Manufacturer #: 1168761
  No Longer Available

Questions And Answers for AD25BSR0

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original failed humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
Parts Used:
Humidistat Control
  • James from Silver Bay, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
Parts Used:
Humidistat Control
  • larry from tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the dehumidifier was not shutting off when water level was full
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
Parts Used:
Float
  • Steven from Owings Mills, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!