ACT111E - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Baked on sauce
12 of 16 people
found this instruction helpful.
-
Julie from Newnan, GA
- A Bit Difficult
- More than 2 hours
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce.
Was this helpful?
Thank you for voting!
The burner was not heating up
11 of 14 people
found this instruction helpful.
-
Jeffrey from Miami Lakes, FL
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I removed only 3 screws that allowed me to lift the glass top on the stove. I removed the burner and I could see where it short circuited. I ordered the new burner element. After it arrived I replaced it by moving the wires from the old element to the new element, and put it back together.
I am sure that I saved at least $200 in "lab ... Read more or".
I am sure that I saved at least $200 in "lab ... Read more or".
Read less
Was this helpful?
Thank you for voting!
element quit working
4 of 8 people
found this instruction helpful.
-
Donald from Jeffersonville, IN
- Really Easy
- 30 - 60 mins
-
Screw drivers
removed 2 screws holding top in place witch gave me ac access to none working part. removed 5 screws witch let me remove part, reversed order to reinstall part, very easy
Donald Carpenter
Donald Carpenter
Was this helpful?
Thank you for voting!
cleaner
2 of 5 people
found this instruction helpful.
-
Mary from Duarte, CA
- Really Easy
- Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
Burner stopped heating
-
Anna from Copperas Cove, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
My husband did the repair. It was so easy that I could have done it. He had to remove 3 screws and then hook up the element. Nothing to it!!
Was this helpful?
Thank you for voting!