Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any inter...Read morenal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.
This is a remote control, and it is used with your air conditioner. The purpose of the remote control is to allow the user the ability to control the functions of the air conditioner at a distance. This model is beige in color, it is 6 inches long, almost 2 inches wide, and 1.5 inches thick. This remote has the ability to turn your applia...Read morence on and off, raise and lower the temperature, adjust the fan speeds, as well as pick your own cooling mode.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
old motor locked up had to replace
19 of 22 peoplefound this instruction helpful.
REX from PLEASUREVILLE, KY
Easy
1- 2 hours
Nutdriver, Screw drivers
had to remove outer cover, then the foam parts covering the fan cage and then remove the five screws that hold the fan/motor unit in the base, after that I cut the wires at the controls so I could match the wire colors up with the new motor, had to loosen the clamps that hold the fans on the shaft at both ends and slide the fans off,when
... Read morethe new motor came I put the unit back together in reverse order it came apart, unpluged old wires one at a time and pluged new wire of same color in its place, all left to do was put outer cover back on and less than two hours had it back in my window feeling the cool air.
Read less
Was this helpful?
Thank you for voting!
Getting the air conditioner out of the wall
11 of 14 peoplefound this instruction helpful.
Linda from Peabody, MA
A Bit Difficult
1- 2 hours
Pliers, Screw drivers
My brother installed the motor/fan. That part was easy. We had to clean out the a/c because it was full of leaves.
By doing this repair we saved $600.00The a/c is good to last a long time.
Was this helpful?
Thank you for voting!
Lost my remote
9 of 11 peoplefound this instruction helpful.
Dana from Nuevo, CA
Really Easy
Less than 15 mins
I really didnt repair anything, but I wanted to share with you,my experience with parts select. My order was processed lightning fast, the shipping was lightning fast, the remote was the correct one I ordered,and the whole experience was 100% perfect. Thank you so much.