ACQ122XP0 Whirlpool Air Conditioner - Overview

Sold individually.

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

This screw is sold individually. Size: 8-32 x 1/4 inch.

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any inter...Read morenal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

This is an air filter and it is made to work with your air conditioner. This purpose of the filter is to keep airborne particles such as dirt, dust, and other debris from getting into your home. This part is a cut-to-fit piece, which means you must cut it to fit your model air conditioner. This part measures to be 20 inches wide, and 10 i...Read morenches long. After you remove your old filter and before replacing your new one, we recommend wiping down your air conditioner unit.

Sold individually.

This is a remote control, and it is used with your air conditioner. The purpose of the remote control is to allow the user the ability to control the functions of the air conditioner at a distance. This model is beige in color, it is 6 inches long, almost 2 inches wide, and 1.5 inches thick. This remote has the ability to turn your applia...Read morence on and off, raise and lower the temperature, adjust the fan speeds, as well as pick your own cooling mode.

The cartridge is a part for your air conditioner and may also be known as a louver assembly. The louver assemblies fit behind the grilles to control the air flow and improve heating and cooling efficiency. If you notice that your air conditioner is not providing the correct temperature, it may indicate an issue with the cartridge. You may...Read more be required to remove the grille in order to make adjustments to the louvers. This part is sold individually. This part is white in color and measures approximately 4 inches by 3 inches. This OEM part comes directly from the manufacturer.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.