This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the intern...Read moreal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
This white door shelf retainer bar keeps bottles, jars, and condiments on the shelf when the refrigerator or freezer door moves. It is supplied at approximately 30.75 inches long and 1.75 inches wide and can be cut to the required length. A bent, broken, or loose bar may leave stored items without proper restraint. Inspect the end support...Read mores as well before replacement, since damaged caps can prevent the bar from staying secure. Confirm the finished length and mounting arrangement before trimming and fitting the replacement rail. This is an OEM part sourced directly from the manufacturer.
This is the door shelf end cap for your refrigerator. It connects to the refrigerator door and keeps the door bar in place. Your refrigerator will have two shelf end caps, one for the right side and one for the left. This part is the left side door shelf end cap. It is made of white plastic and is a little over two inches long. This is an OEM part from the manufacturer and is sold individually.
This is the door shelf end cap for your refrigerator. It connects to the refrigerator door and keeps the door bar in place. Your refrigerator will have two shelf end caps, one for the right side and one for the left. This part is the right side door shelf end cap. It is made of white plastic and is a little over one inch long. This is an OEM part from the manufacturer and is sold individually.
This is the door shelf end cap for your refrigerator. It connects to the refrigerator door and keeps the door bar in place. Your refrigerator will have two shelf end caps, one for the right side and one for the left. This part is the left side door shelf end cap. It is made of white plastic and is a little over one inch long. This is an OEM part from the manufacturer and is sold individually.
Interior lighting depends on a secure connection between the bulb and its power supply. This refrigerator light socket holds the bulb in place and provides the electrical contacts needed to illuminate the compartment. Cracked plastic, damaged contacts, or a broken locking tab may leave the bulb loose or prevent reliable lighting. Replacin...Read moreg a damaged socket helps restore bulb support and electrical connection. The socket mounts into the light housing and connects to the appliance wiring through metal terminals. Disconnect power before handling the socket or wiring. This is an OEM part sourced directly from the manufacturer.
This plastic ice cube tray holds water for freezing into 12 cubes at a time. Channels help water spread evenly during filling, while corner supports allow trays to stack securely in the freezer. The tray measures approximately 11 inches long and 4.5 inches wide and is sold individually. Its flexible design allows frozen cubes to be releas...Read moreed by hand. Cracks or splits may let water leak before it freezes and are reasons to replace the tray. Check the available freezer space against the tray dimensions before ordering. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light socket melted around bulb
66 of 108 peoplefound this instruction helpful.
William from Alexandria, VA
Really Easy
Less than 15 mins
Screw drivers
After unsuccessfully trying to change the blown light bulb I discovered that the plastic light socket had gotten so hot that it melted and permanently fused with the blown bulb. After my new socket arrived in the mail I just popped the temp control assembly out with a screw driver and removed the old socket and placed the new one in.
... Read moreWhole operation to 5 minutes.
Read less
Was this helpful?
Thank you for voting!
The compressor would not run.
18 of 27 peoplefound this instruction helpful.
Linda from Gurnee, IL
Easy
30 - 60 mins
Screw drivers
I removed the cover, used a multimeter to test the compressor circuit, and found the compressor start relay to be defective. Ordered a new one and installed it when it arrived.
Was this helpful?
Thank you for voting!
Compressor was short cycling
12 of 17 peoplefound this instruction helpful.
Sherman from Tuttle, OK
Easy
30 - 60 mins
Screw drivers
Removed the cowling with a square drive screw driver, removed the spring clip from the cover of the compressor controls with a screw driver, pulled off the old compressor start relay and replaced it with the new part. Since other problems could have caused the compressor to short cycle this was a "replace the part and hope it would work"
... Read moresince that would be the most common reason and it was not a very expensive part.