Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ACE254XH1

ACE254XH1 Whirlpool Air Conditioner - Overview

Get Parts and Repair Help for ACE254XH1

If you know the air conditioner repair part you need, you can browse the list of all parts on the ACE254XH1, or you can search by name or part description. You can also find your part by where it is located on the ACE254XH1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your air conditioner. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for ACE254XH1

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.79

Washer, Support

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They...

$3.67

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

$2.96

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$30.25

Silicone Rubber Adhesive - 2 oz

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any internal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

$56.02

Air Filter

This part is sold individually. The air filter is part of your room air conditioner and prevents dirt, dust, and other debris found in the air from getting inside your home. Over t...

$5.40

Transformer Screw

This screw is sold individually. It is a genuine OEM replacement part, and it is designed for use with refrigerators. Most often it is used with the ice bucket ice deflector, retainer clip, and front cover. Due to varied uses we recommend referring to model-specific diagrams for exact placement. This screw measures 8-18 by 1/2 inch.

$22.68

Motor Clip

$4.88

TIE-WIRE

$3.67

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$27.23

SEALER

Common Symptoms of the ACE254XH1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Filter was filthy, no telling how long it had been since changed

  • Customer: SHIRLEY G. from Mabank, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 8 people found this instruction helpful
Took out old filter and replaced it with the new filter read more

Needed new Ice Maker

  • Customer: Joseph from Liberty, MS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 4 of 9 people found this instruction helpful
Removed back cover, and installed the water valve. Removed the water supply tube cover and installed the supply tube. Opened freezer and removed the electrical cover, removed the knockouts and pulled line out. Hooked up ice maker and installed it to wall. Turned water on and waited a couple hours, it is making ice. Installing the ice maker was easy. Ru... read more

old filter had become brittle & needed replacing

  • Customer: Rhea from Plainview, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 10 people found this instruction helpful
Just removed the old filter and replaced. Slid right in, no tools required. read more