EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

A89 Admiral Cooktop - Overview

Models starting with A89

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range Grease Filter – Part Number: WP707929
$28.42
In Stock
Range Grease Filter
★★★★★
★★★★★
(34)
Part #WP707929
The function of the grease filter is to trap grease into the filter from the exhaust air. The grease filter is intended to be used with certain downdraft cooktops and ranges. This grease filter is roughly fourteen inches long and almost twelve inches wide, and chrome in color. Removing your old grease filter and replacing it with a new one is an easy job, users say it took them less than fifteen minutes to install. We recommend that when removing your current grease filter, you use work gloves to protect your hands and clean the entire area thoroughly before installing the new filter.
Surface Burner Receptacle Kit – Part Number: 12001676
$19.30
In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(21)
Part #12001676
The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your appliance from the power supply and wear work gloves to protect your hands. The surface burner receptacle kit comes with a plastic block, high temperature wire nuts, a metal bracket, and wires. This part functions as the connection between the wire harness and the surface element in your range.
Standard Y-Frame Range Surface Burner – Part Number: WP660532
$28.42
In Stock
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(14)
Part #WP660532
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1500W. The manufacturer suggests replacing the receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy, and you will not need any tools. To complete the repair, simply lift out the old burner and replace it with the new one. Check that the burners are turned off before you begin this repair.
6 Inch Drip Bowl - Black – Part Number: W10290353RW
$20.37
In Stock
8 Inch Drip Bowl - Black – Part Number: WPW10290350
$16.07
In Stock
8 Inch Drip Bowl - Black
★★★★★
★★★★★
(4)
Part #WPW10290350
This black porcelain drip bowl with a hole in the bottom is intended for use with some electric ranges and cooktops. This drip bowl measures 10 inches in diameter at its widest point. The purpose of the drip bowl is to catch any spills or grease from the cookware sitting on the burner. The drip bowl might burn, rust, or get to the point where you can no longer get it clean, and will need to be replaced. You will need to remove the surface burner to remove the old drip bowl. These bowls are dishwasher-safe.
Surface Element Switch – Part Number: W10900107
$47.40
In Stock
Surface Element Switch
★★★★★
★★★★★
(3)
Part #W10900107
A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a knob on the user interface of the cooktop or stovetop and is adjustable by the user. This burner switch is compatible with various ranges and cooktops and is a genuine OEM part that is sold with all of the necessary hardware to secure it, such as the Philips-head and flat-head screws, brackets, bolts, washers, palnuts (also known as a push-on nut) and terminals. Over time, this switch can wear out or become faulty, leading to heating issues for your stovetop and cooktop, such as not heating, overheating, or staying at the same heat level. Depending on the orientation of your cooktop, you will need to install this switch with or without the bracket and palnut, so reference your user manual for that information when replacing this switch. You will need a screwdriver and set of pliers during the replacement and installation process, and simply need to follow the instruction manual included with this switch to correctly replace and rewire it.
Cooktop Cleaner – Part Number: W10355051
No Longer Available
Cooktop Cleaner
★★★★★
★★★★★
(7)
Part #W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain cooktop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Cartridge Male Contact Spade – Part Number: Y708572
$12.85
In Stock
Cartridge Male Contact Spade
★★★★★
★★★★★
(1)
Part #Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
Rock Grate Support – Part Number: 700819
$49.50
Special Order
Rock Grate Support
Part #700819
Sold individually.
Infinite Switch Knob – Part Number: WP7737P026-60
$27.36
On Order
Infinite Switch Knob
★★★★★
★★★★★
(2)
Part #WP7737P026-60
This infinite switch knob is two inches in diameter and is black in color. This knob has a red indicator line as well as light gray lettering denoting the temperature level and the off, low, and high positions. The switch knob allows you to control the heat of the surface burner on your range. To replace the knob, you simply pull the old knob off with your hands and snap the new one into place. The knob may become old and worn over time and will need to be replaced.
Surface Burner Element - 8 Inch – Part Number: WP3191454
$95.15
In Stock
Surface Burner Element - 8 Inch
★★★★★
★★★★★
(3)
Part #WP3191454
This surface burner element is a genuine OEM replacement part for your kitchen appliances. It measures 8inches in diameter with a wattage of 2100W. You will need to replace the element if you notice that it is discolored, making popping or crackling noises, no longer level, or no longer heating up. To replace the faulty burner element, gently lift and pull it off the appliance. Next, plug the new element terminals into the socket. Remember to first turn off your appliance or turn off the circuit breaker before you begin any repairs.
Rock Plate – Part Number: 74011338
No Longer Available
Rock Plate
★★★★★
★★★★★
(1)
Part #74011338
This part is used as a support for the grill element. Sold individually.

Common Symptoms of models starting with A89

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced filter
486 of 513 people found this instruction helpful.
  • ELOISE from MILFORD, OH
  • Really Easy
  • Less than 15 mins
pulled old one out , cleaned the area & replaced with the new one.
Was this helpful?
Thank you for voting!
Old grease filter that I actually did not know I had to change
451 of 540 people found this instruction helpful.
  • deborah from fort pierce, FL
  • Really Easy
  • Less than 15 mins
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen
Was this helpful?
Thank you for voting!
Stove top element not working due to bad receptacle.
194 of 214 people found this instruction helpful.
  • Richard from Carthage, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister 's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Was this helpful?
Thank you for voting!