Quick Question!

Have you ever purchased from PartSelect.com before?

Authentic Parts
Models > A59FN-5TVW-R

A59FN-5TVW-R Admiral Wall Oven - Overview

Get Parts and Repair Help for A59FN-5TVW-R

If you know the wall oven repair part you need, you can browse the list of all parts on the A59FN-5TVW-R, or you can search by name or part description. You can also find your part by where it is located on the A59FN-5TVW-R by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for A59FN-5TVW-R parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A59FN-5TVW-R

[Viewing 4 of 4]
BODY
CONTROL PANEL (A59FN - 5TVW - R)
INTERNAL CONTROLS
OVEN
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.80
In Stock

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$29.74
In Stock

Long Oven Sensor

This long oven sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of your oven cavity. There is an adapter at one end, a probe at the other, and they are connected by an insulated wire. The probe is approximately 7 inches long. You can test the sensor with a multi-meter for functionality. You need to check the model-specific manual to determine what the proper resistance is for your specific appliance. This oven sensor comes with two wire harness adapters and a set of instructions.

$23.78
In Stock

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...

$19.52
In Stock

Terminal Block

This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.

$50.53
In Stock

Bake Element (15" long x 19" wide)

This spade style bake element with push on wire terminals is 15 inches long and 19 inches wide. The depth of the terminals is three inches.

$3.67
In Stock

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

$3.12
In Stock

Screw

Sold Individually.

$3.02
In Stock

Screw

This screw is sold individually.

$2.96
In Stock

Frame Screw

Sold Individually.

$9.09
In Stock

Clock Knob - black

The clock knob attaches to the center of the oven control panel and is used to adjust the built-in clock. This clock knob is less than an inch in diameter. It is all black in color and is made of plastic. This knob will accept a D-shaped shaft. It is worth noting that the clock knob does not work in place of the temperature knob, as they are designed differently. Many of our customers described this repair as easy. To complete the repair, simply pull off the damaged knob and replace it with the new one.

Common Symptoms of the A59FN-5TVW-R

[Viewing 9 of 9]
Little to no heat when bak

Fixed by these parts

Show All
Will Not Start

Fixed by these parts

Show All
Oven is too hot

Fixed by these parts

Show All
Oven not heating evenly

Fixed by these parts

Show All
Element will not heat

Fixed by these parts

Show All
Touchpad does not respond

Fixed by these parts

Show All
Will not program

Fixed by these parts

Show All
Little to no heat when bro...

Fixed by these parts

Show All
Door won’t open after self...

Fixed by these parts

Show All

Replacing the Light Bulb - 40W

Replacing the Long Oven Sensor

Replacing the 2 Piece Broiler Pan

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not holding 350 F, when cooling the coils did not reheat

  • Customer: David from Westford, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 122 of 141 people found this instruction helpful
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. ... read more

F1-1 code

  • Customer: charles from marstons mills, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 70 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the sensor out about 3 inches and disconnected the two wires. Next, I connected new sensor and screwed the new sensor back in place. One area for caution. Make sure that the electrical connection is pushed in past the insulation on the back side of the oven. Failure to do so will ... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 75 of 158 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.