A2H243GA0 (AMBAHCI) LG Air Conditioner - Parts

Unusual noise from an indoor blower can be caused by a worn blower wheel bearing. This replacement bearing provides a smooth support point that allows the wheel to rotate while moving air across the room. Inspect the wheel for cracks, dirt, rubbing marks, or looseness, since these problems can produce similar sounds. Turn off the unit at ...Read morethe breaker and verify that power is disconnected before opening the cabinet. Keep track of screws, clips, and wheel position during removal. Install the bearing in the correct direction, avoid forcing it into place, and spin the wheel by hand to check for rubbing before reassembly.

This is a cross flow fan assembly for an air conditioner. This is a genuine replacement part sourced directly from the original manufacturer. A cross flow fan assembly is a key part of your air conditioner. It prevents the internal parts of your appliance from overheating by creating a wide and even flow of air throughout the inside of th...Read moree air conditioner. If you are noticing your appliance getting too warm or overheating, it is recommended to stop using the appliance before replacing the fan. Continuing to use the appliance could cause internal damage to other parts. It is made entirely of plastic, and is off-white in color. This part is sold individually.

If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capacitor are located inside the cabinet and to gain access you will need to remove the cover. If the capacitor does not show any visible signs ...Read moreof damage you may require a qualified technician to test it. Make sure that the replacement capacitor has the same specifications as the original. NOTE: Because capacitors carry a charge even when the unit is disconnected from the power, use extra caution when performing this repair.