Models
>
A126W
A126W Jenn-Air Cooktop - Overview
Sections of the A126W
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 1 of 1]
White Halogen Element Cartridge - with glass-ceramic surface
This part number matches the current model number A126W
PartSelect #: PS2103294
Manufacturer #: A126W
Manufacturer's Number: A126W Haloring halogen element with glass-ceramic surface for all Designer Line Jenn-Air cooktops. End plug-in cartridge, also available in black. Note: This model has been repl...
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Cartridge Male Contact Spade
PartSelect #: PS1988157
Manufacturer #: Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
$13.95
In Stock
Burner Cartridge Terminal Block
PartSelect #: PS11757594
Manufacturer #: WPY708730
No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.
$61.33
In Stock
Burner Element - Right Front
PartSelect #: PS11764908
Manufacturer #: W10823698
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
$219.98
In Stock
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually.
Size: 8-32 x 1/4 inch.
$9.13
Special Order
Terminal Block Insulator
PartSelect #: PS1641107
Manufacturer #: 708834
This part fits inside your range's terminal block to act as an insulator for the contact spade.
$16.22
Special Order
CLIP
PartSelect #: PS1988173
Manufacturer #: Y708910
This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.
No Longer Available
Questions And Answers for A126W
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sylvia
August 11, 2023
Plugged stove in and all lights come on we have electric but none of the burners gets warm. There is a small cord with a plug at end but don’t know where it goes
For model number A126W
Hello Sylvia, thank you for contacting us. According to our research, you may need to connect the small cord with the terminal block connector spade, part number PS1988157, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Cartridge Male Contact Spade
$13.95
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the A126W
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat on burner
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one.
Parts Used:
-
paul from trumbull, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
34 of 49 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit.
... Read more
Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Read less
Parts Used:
-
Johnny from Henderson, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
24 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder.
Parts Used:
-
Calvin from Merced, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
27 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!