Quick Question!

Have you ever purchased from PartSelect.com before?

Models > A100W-8

A100W-8 Jenn-Air Cooktop - Overview

Get Parts and Repair Help for A100W-8

If you know the cooktop repair part you need, you can browse the list of all parts on the A100W-8, or you can search by name or part description. You can also find your part by where it is located on the A100W-8 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for A100W-8 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A100W-8

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.21

Surface Burner Receptacle Kit

The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sur...

Order within the next 8 hrs and your part ships today!
$7.54

Drip Bowl - Chrome - 8"

This is a drip bowl, and it is used in conjunction with your range. The function of this part is to sit underneath your stove top burner element. This will allow the bowl to catch any spills that fall through the burner while cooking. This model is chrome has a chrome color trim, it measures 8 inches in diameter, and is sold individually. Before installing this part, you must wait until the surface of your range is cool to the touch. Replacing the drip bowl will require you to touch the burner on your stove top.

Order within the next 8 hrs and your part ships today!
$9.96

Drip Bowl - 6"

The drip bowl is found under the 6-inch burner on your range. This square chrome stove top drip pan is intended for use with electric ranges. It has a 2-inch inner hole diameter an...

Order within the next 8 hrs and your part ships today!
$6.17

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

Order within the next 8 hrs and your part ships today!
$25.32

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

Order within the next 8 hrs and your part ships today!
$4.94

Screw

Order within the next 8 hrs and your part ships today!
$2.96

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

Order within the next 8 hrs and your part ships today!
$36.36

Element Receptacle Assembly

This part connects the surface burner to the wiring harness.

Order within the next 8 hrs and your part ships today!
$12.93

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

Order within the next 8 hrs and your part ships today!
$3.67

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 155 of 167 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

Range element receptacle had shorted out

  • Customer: Daniel from Great Falls, VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 18 of 22 people found this instruction helpful
(1) Disassembled range element cartridge unit by removing six machine screws on sides
(2) Removed old element receptacle assembly (note screww attaching the clip to ring was corroded and had to be drilled out and replaced - screw not included), retaining existing element (determined it was good)
(3) Fited up new element receptacle assembly and dete... read more

The top would not heat,large or small eye.

  • Customer: Calvin from Merced, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 19 of 33 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more