This broil element, also known as an electric oven broil element, is used in ovens. Located on the roof of your oven, the element provides and supplies the heat needed for the broil function. It is 8 1/2 inches wide and 16 inches long with 1 3/8 inch deep terminals. The tool needed for this installation is a screwdriver. As a safety preca...Read moreution, make sure to unplug the oven or range from the power source before installing this part. Remember to wear gloves to protect your hands. Refer to the installation instructions provided by the manufacturer for further guidance.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light wont come on
4 of 9 peoplefound this instruction helpful.
James from Fort Collins, CO
A Bit Difficult
1- 2 hours
Pliers, Screw drivers, Wrench set
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the break
... Read moreer. Then I saw the short and when I tested the switch it would not click. The install was fine.