99944200545 (S08900001001-S08900999999) Echo Trimmer - Overview

This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends). This nut can have v...Read morearious uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.

This authentic manufacturer-sourced component is specially designed for Echo blower attachments. It is an identical replacement for a missing or a damaged hardware that is utilized to secure the pas attachment. Make sure to refer to the owner's manual for your specific model for the exact location and the correct application of this item....Read more Keep in mind this high-quality product is made of durable metal and is sold as an individual item.

This is a genuine Echo replacement part that has been sourced from the original manufacturer to be used with trimmers. The stopper is used to support the flexible liner to limit vibration inside the main pipe assembly. The stopper is sold as an individual replacement part, please note two stoppers may be needed.

This SRM Echomatic head, commonly referred to as a bump head, is situated beneath the debris shield at the end of the drive shaft assembly in your trimmer. This type of cutting head features a convenient bump-to-advance line feeding system. By gently tapping it against the ground during operation, the line automatically advances without m...Read moreanual adjustments. The head can hold up to 20 feet of .095-inch line and can handle a maximum line diameter of .105 inches. If you observe that the line is not advancing, there is irregular feeding, or you notice visible wear, it has to be replaced. Start by inserting the locking tool into the hole on the drive shaft. Turn the cutter head clockwise to unthread it until you can detach it. Align the hole in the adapter plate of the new cutting head with the hole in the shaft. Install the locking tool and turn it counterclockwise until it is securely in place, then remove the locking tool. Keep in mind that this genuine OEM replacement part comes with all the required hardware for your repair.

This is an authentic replacement part manufactured for use with outdoor power equipment. The screw has multiple applications depending on the model of equipment. This screw is sold as an individual replacement part please see model diagram for associative parts.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This is an authentic Echo replacement part manufactured for use with trimmers and brushcutters. The spool is used to hold the trimmer line and fits inside the trimmer head housing. This spool is available as an individual replacement part, please see model diagram for associative parts.

This special replacement part is commonly used on Echo trimmers/brushcutters. This is the shaft-bolt to which a trimmer head is attached to. Please note this bolt is sold individually. To complete this repair you will need a wrench.

This authentic manufacturer-sourced component is specially designed for Echo and Shindaiwa lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the appropriate diagrams for your specific model for the exact location and the correct application...Read more of this screw. Keep in mind this high-quality product is made of durable metal and is sold as an individual item. A screwdriver will be needed to secure or remove it.

This is a genuine replacement part sourced directly from the manufacturer. The adapter plate is commonly found in Echo trimmer/brushcutters. This part is made of metal, and is used to hold components in the gearcase assembly. You may require a screwdriver and pliers when replacing this item. The adapter plate is sold as an individual replacement part.