990430 Simplicity Snow Blower - Overview

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nuts location and usage.

Lockwasher split 3/8

This is an authentic Simplicity replacement part. The idler pulley is designed by the manufacturer for use in lawn mowers and snow throwers. This part is made of metal, and is used to adjust tension on the V-belt. You will require a wrench when replacing this part. This item is sold individually.

Seal-oil 0.625id x 1.

This item is available as an individual replacement part. The retaining ring goes next to the pinion gear and is made out of metal. It may require a set of pliers and a screwdriver during installation. This part may become bent or broken and will need to be replaced. It is an OEM for use in generators, lawn mowers, and pressure washers from Briggs & Stratton, Murray, Troy-Bilt, Snapper, and Simplicity.

This is an authentic Hitachi replacement part that has been sourced from the original manufacturer to be used with circular saws, miter saws, routers, drywall screwdrivers, and jig saws. The metal flat head screw is used with several different types of tools and the application of the screw can vary based on the model of equipment. It is ...Read morerecommended to review your model's illustrated diagram to verify this screw's location and usage. This item is sold as an individual replacement.