98FN-4CW Magic Chef Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
Lower oven heating element burnt out.
1 of 4 people
found this instruction helpful.
-
Coreen from Hagerstown, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
I shopped around locally before shopping online. Parts Select provided me with significant time and money savings.
Turn off power. Remove the element. Installed the new element. Turned on the power. Easy... Easy... Easy...
Turn off power. Remove the element. Installed the new element. Turned on the power. Easy... Easy... Easy...
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people
found this instruction helpful.
-
peggy ann from forest city, NC
- Really Easy
- Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Burned out element
1 of 4 people
found this instruction helpful.
-
Robert from Scotch Plains, NJ
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Very easy since it was an exact match to the old burned out element.
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people
found this instruction helpful.
-
Shirley from Las Vegas, NV
- Really Easy
- Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people
found this instruction helpful.
-
Judith from Phoenix, AZ
- Really Easy
- Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
The Bake Element Ceased To Bake.
-
Robert from Pasadena, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Turn off the breaker. Remove the two screws holding the bake element and disconnect the two wires. Plug the new element in and re install the screws. Trip the breaker back on and test the oven. It works.
Was this helpful?
Thank you for voting!
Oven element would not heat.
-
Denver from Denton, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Turned power off by switching off the breaker. Removed both racks from oven. Removed two Phillips head screws at back of oven securing the old heat element. Pulled old heat element forward about four inches exposing the two power wires connected to it. Removed the wires from their connectors. Removed old element. Connected new element to
... Read more
power wires and pushed it back in place. Replaced new Phillips head screws. Replaced racks, and turned power back on. Oven was fixed in less than five minutes. Disposed of old element. Life is good.
Read less
Was this helpful?
Thank you for voting!
would not heat
-
robert from pantego, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
put the old one out,put new part in that easy,works like new
Was this helpful?
Thank you for voting!
bake element burned through.
-
Ronnie from Albuquerque, NM
- Really Easy
- Less than 15 mins
-
Screw drivers
Very simple. Removed two screws-pulled element out about 3-4 inches-pulled off the contacts-reversed procedure using the provided screws, turned the breaker switch on and everything worked fine. Excellent service from parts select and quick shipping.
Was this helpful?
Thank you for voting!
Heating element not working
-
sherri from Topeka, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed two screws, unplugged two small plugs, plugged the new ones in and screwed the screws back in. Less than 10 minutes.
Was this helpful?
Thank you for voting!
Light bulb failure
-
Grant from Alexandria, VA
- Really Easy
- Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
Door gasket broken
-
Tim from North Hills, CA
- Really Easy
- Less than 15 mins
This part showed up so fast I couldn't believe it. Took longer to unwrap the package than to install the gasket.
Was this helpful?
Thank you for voting!
Heating element broke causing a flame up in oven
-
Wava from Louisville, KY
- Easy
- Less than 15 mins
-
Screw drivers
Loosened the two screws holding the element, pulled the element out of the back of the oven, loosed the two wire leads connected to the back of the element, removed the broken part, placed the new element into the oven, reconnected the wire leads, pushed them back into the insulation in the back of the oven, repositioned the element into
... Read more
its place and replaced the two screws holding it into place with the new screws that came with the new part. Oven element fired right up first try without any further complications. One of the easiest appliance fixes I have ever done!
Read less
Was this helpful?
Thank you for voting!