This is a door striker, it is gray in color and is a part found on your washer. The purpose of the striker is to keep your washer door closed for usage. This piece will attach to your appliance lid and will activate the door switch when your lid is closed. The most common reasons for needing to replace this part are if your lid will not c...Read moreonsistently open or close, and your washer will not consistently start. The only tool you will need to complete this installation is a Phillips screwdriver.
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assem...Read morebly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.
This is a door hinge with bushings and works in conjunction with your washer. The purpose of this part is to attach to the outside of the front door panel to help with the lid opening and closing properly. The hinge will fasten the front panel of the washing cabinet to the lid of the washer. This piece is roughly 9 inches long, almost 3 i...Read morenches high, and roughly 2.5 inches wide. The reason for needing to replace this part is if your lid/door will not open or close properly, which may lead to leaking.
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.
This washer door boot spring clamp secures the rubber door seal in place, maintaining a tight, watertight fit between the tub and front panel during operation. Its tension design helps prevent leaks and keeps the door properly sealed throughout wash cycles. Replacement is recommended if the seal becomes loose, water leaks from the front, ...Read moreor the clamp is damaged, helping restore a secure fit and reliable washer performance.
This dispenser drawer handle frame attaches to the detergent drawer of select washing machine models, allowing for smooth opening and closing. Made from durable white plastic with a clear exterior accent, it’s designed to restore functionality when the original part is cracked or the mounting tabs are broken. Measuring to fit precisely, t...Read morehis replacement part is compatible with various models and is sold individually. Be sure to verify your washer’s model number before purchasing to ensure proper fit.
This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and is chrome-colored. The shoulder screw measures to be less than an inch long, and has a flat bottom and top. In general screws are typically...Read more made of metal, and the purpose of them is to be used as a fastener when attaching one piece/part to another. This model is sold individually.
This detergent drawer assembly is designed to hold and dispense cleaning agents during the wash cycle. It features separate compartments for liquid or powder detergent, fabric softener, and bleach, ensuring each is released at the correct time for optimal cleaning performance. Positioned at the front of the washer, the drawer helps mainta...Read morein proper distribution and prevents residue buildup. Replacing this part can resolve issues such as detergent not dispensing, leaks or puddles near the drawer, lingering odors, or difficulty opening and closing the drawer. Installation is straightforward—slide the old drawer out, align the new one, and secure it in place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter - For model number 970L48422E0
December 16, 2019
Washer has mold on inside of the gasket what do you recommend to use to clean regards
Hello Peter, thank you for your question. We would recommend removing the gasket and cleaning it with soap, water and javex. I hope this helps!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Vishnibhai - For model number 970L48452E0
June 21, 2026
need front door gasket
Hello Vishnibhai, thank you for reaching out to us. The door boot seal or gasket you are looking for is part number PS10057189. We hope this information helps!
Can the front loading washing machine door be reversed on this machine. From right to left opening.
Hello Vikki, thank you for your question. The door is unable to be reversed because of the locking system in the machine. Sorry!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Ante - For model number 970L48422E0
August 31, 2026
the washer cycles work for a minute than go down to 3 minutes, no water enters the washing machine. The rinse and spin cycle works for the 22 minutes and water does enter. Trying to figure out what part needs to be replaced.
Hello Ante, thank you for reaching out to us. Based on the description of the issue, you will need to replace the water inlet valve, part number 134959340, to fix the issue. If the valve/solenoids fail (or the screen is clogged), no water will enter during the main wash stage. The washer senses no water fill, and skips/cancels the wash cycle. The rinse cycle typically uses a different solenoid path or cold-water valve, which is why rinse & spin still fills with water and completes properly. We hope this information helps!
Kenmore front load washer wont spin even in spin and rinse,everything else works,sometimes you can see timer change also
Hello and thank you for writing.
It certainly sounds like it could be a faulty door lock and switch assembly PS12364048 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Door Catch
574 of 593 peoplefound this instruction helpful.
Joy from Columbia, MO
Really Easy
Less than 15 mins
Screw drivers
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Was this helpful?
Thank you for voting!
Door on washer wouldn't lock or start
477 of 565 peoplefound this instruction helpful.
DOUG from KING FERRY, NY
Really Easy
Less than 15 mins
Screw drivers
1. Unplug unit. 2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver. 3.Slide top back and remove. 4. Open door of washer and unscrew 2 screws holding in door lock unit. 5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Was this helpful?
Thank you for voting!
Washer would not spin
125 of 142 peoplefound this instruction helpful.
Keith from Sayville, NY
Really Easy
Less than 15 mins
Screw drivers
Door lock takes a beating due to flimsy washer door which does not align well and subsequently gets slammed each time which causes lock to malfunction telling the washer that it is not locked. Due to safety the washer will not go into the spin mode. Remove top lid (2 screws) open washer door and loosed the 2 screws holding the lock assemb
... Read morely in place. Reach down into the washer and unsnap the 3 wire harnesses. Reverse to reinstall. Very easy.
My Orders
