966V-4CLW Maytag Range - Overview

Diagrams for 966V-4CLW

See every part. Know exactly what you need.

Parts for the 966V-4CLW

$62.60

Door Seal - Top

★★★★★

(7)

Part #WP7212P006-60

This oven door seal creates a protective seal around an oven door to prevent heat from running out of a closed oven and keeps room air from entering the oven. This part is 17.5 inches long and made of rubber. The metal hook on both ends of the seal is there to keep it in place. Remove screws to take off old seal using pliers and replace...Read more

Read less

$78.70

Bake Element (16" long x 16" wide)

★★★★★

(3)

Part #WP7406P012-60

This spade style bake element is 16 inches long and 16 inches wide. The depth of the terminals is two inches. Use it for your Maytag brand electric range or oven.

SWITCH- LI

Part #W10127316

DISCONTINUED

Part #7711P122-60

DISCONTINUED

Part #1790274

DISCONTINUED

Part #1938361K

Spring

Part #1790258

Spring

Terminal Block

Part #7401P001-60

Block, terminal

Terminal Block

Part #1867210

Block

Mechanical Clock and Timer

Part #1895419K

Clock, automatic cook

Common Symptoms of the 966V-4CLW

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

heat element wouldn't heat after 30 years of cooking

11 of 15 people found this instruction helpful.

Mary from Salisbury, NC
Really Easy
Less than 15 mins
Pliers, Screw drivers

Pulled screws loose from element, pulled old element out and replaced with new..really simple

Was this helpful?

Lower element in oven not heating.

6 of 8 people found this instruction helpful.

tom from cincinnati, OH
Really Easy
15 - 30 mins
Screw drivers

Removed, tested and measured the old element. Got on line to find the part and ran across Part Select. Ordered and received the part in three business days. It was an exact fit and in good order. The total operation including removal and replacement of the element, locating and ordering the part only took about thirty minutes.....and that ... Read more

Read less

Was this helpful?

The bake element was corroding.

Jeffrey from Abilene, TX
Really Easy
Less than 15 mins
Screw drivers

I turned breaker off for oven, removed screws from element mount, pulled the element out about two inches, then slid wire connectors up to unhook from element. Then set new element in, slid wire connectors on to back new element, then used pliers to make sure they were tight and secure by squeezing them, screwed element back in, turned br ... Read more

Read less

Was this helpful?