96192000301 Poulan Snow Blower - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

This replacement scraper bar is an authentic OEM supplied item that is commonly utilized on Poulan and Husqvarna snow throwers. It is secured behind augers to scrape up the snow that is left behind. This durable metal item is sold individually, please note the hardware to secure this bar is sold separately. You should only need a wrench to replace this part.

This Husqvarna belt is used in snowblowers. It is an OEM part sourced directly from the manufacturer. The impeller belt goes around the impeller pulley and helps to link rotating shafts. The belt I made of flexible material and will need to be replace if it becomes worn or stretched. This item is priced individually.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This is a genuine replacement part sourced from the original manufacturer for use with snow blowers made by Husqvarna and Poulan. This part attaches to the drive control rod and manages the movement of the shift lever. You will need pliers to replace this part. This spring traction drive is sold individually and made of metal.

This is a genuine OEM part from Husqvarna. The brake spring is compatible with many snowblower machines. This metal spring is hooked from the frame assembly to the idler pulley, providing tension to the snowblower brake. The brake spring is sold individually. For the repair, you will need a screwdriver, adjustable wrench and a pair of pliers.

The rubber wheel ring attaches to the wheel hub. This part is an OEM from Husqvarna, Poulan, and Jonsered for use in snowblowers. It is sold individually. A socket set and a wrench set might be required during the replacement of this part. It may become broken and will need to be replaced.

This is an original replacement part manufactured for use with snowblowers. The special handle knob is used to secure the handles and to adjust the position of the handles. This handle knob is available as an individual replacement part, please note two are required.

This axle and drive bearing helps support rotating shafts by reducing friction and maintaining proper alignment within the drive system. Its metal construction is built to handle steady loads and repeated use, ensuring smooth wheel or auger rotation and minimizing stress on surrounding components. Replacing a worn or noisy bearing with th...Read moreis part helps restore quiet operation, prevent axle damage, and maintain reliable performance on snow blowers, lawn tractors, and riding mowers.

This OEM auger control spring in your snow thrower connects the traction control rod and the auger control assembly. It regulates the engagement and disengagement of the auger for effective snow throwing. If the spring is broken or stretched, the auger will not engage properly and may feel loose. Abnormal noises or vibrations may also occ...Read moreur. If not replaced, the auger may become unpredictable or difficult to control. To replace the auger control spring, use pliers to release it from its attachment points. It is commonly located at the end of the control rod, attached to a sleeve. This replacement spring is sold individually.

This is a genuine OEM sourced component which is specially made for use with Husqvarna and Poulan lawn and garden equipment. The washer helps to ensure a tight fit between connected parts, unfortunately, over time the material will wear out and it may begin to crack eventually requiring a replacement. This high-quality part provides an id...Read moreentical replacement for a missing or a faulty friction washer that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this part is made of durable nylon and is sold individually.