96172000300 Poulan Lawn Mower - Overview

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This drive control cable is a high quality replacement part that is sourced from original equipment manufacturer for use on high wheeled trimmers. The control cable stops the blade when the control handle is released, if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note one durable rubber insulated cable is included per order.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This replacement belt is a genuine item that is sourced directly from original equipment manufacturer. It is commonly used v-belt for high wheeled trimmers. This is the the main belt that drives the cutter head. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. This part is made out of rubber ma...Read moreterial and it is sold individually. To complete this repair you will need a set of wrenches and a screwdriver. • First remove screw at front of chassis cover • Lift cover up and away from trimmer • Remove the two (2) screws on sides of trimmer securing the debris shield • Turn trimmer on its side with carburetor and fuel cap up • Remove the two (2) screws on under-side of trimmer securing the debris shield • Slide the debris shield rearward and remove • Remove belt from engine pulley on crankshaft • Remove belt from trimmer head pulley • Note the position of the control cable and idler return spring • Remove idler assembly from chassis and re-move belt and idler from trimmer • Remove belt from idler assembly by removing bottom belt keeper and idler pulleys • Assemble new belt, idler pulleys and bottom belt keeper to idler bracket • Tighten pulley bolts securely • Position belt and idler assembly in trimmer, reconnect idler spring and reattach idler to chassis

This is a manufacturer approved replacement part designed for use with high wheeled trimmers. This carrier plate acts as a trimmer head/housing which secures the trimmer line. It is made out of metal and it is sold individually. Please note the locking plate/tab is sold separately. To complete this repair you would need a socket wrench to remove the bolt which holds the assembly to the jackshaft.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

This is an authentic replacement part manufactured for use with walk-behind lawnmowers. The hex head screw is used with several different models of lawnmowers and is commonly used to secure a guard to the deck assembly. This hex head screw is available as an individual replacement part, please see model diagram for associative parts.

An authentic item which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is a high-quality replacement for a missing or damaged bracket that is attached to the lower handle, please refer to the appropriate diagrams of your model for the correct location and application of this hardware...Read more. This part is made of durable metal material and is sold individually, keep in mind the hardware to secure it is sold separately.

This pulley idler is an OEM part direct from Craftsman for lawn mowers and lawn tractors. This part engages tension to the belt. It is recommended to review your models diagram to verify the parts compatibility. This pulley idler is made of durable material and sold individually.

This genuine manufacturer-sourced part is specially designed for Husqvarna, Poulan and Weed Eater lawn and garden equipment. It is an identical replacement for a missing or a faulty v-groove pulley that was installed on a new unit. The pulley helps to secure a belt and it also transfers the motion. Please make sure to refer to the appropr...Read moreiate diagrams of your model for the exact location and application of this component. Keep in mind this high-quality pulley is made of durable materials and is sold individually.

This is an OEM part sourced directly from the manufacturer. The shoulder bolt is commonly found in lawn mowers from Poulan, Weed Eater, and Husqvarna. This part is made of metal, and is generally used to secure the axle arm that holds the wheels. Please be aware that there are different bolts used in the machine. Refer to the parts di...Read moreagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The shoulder bolt is available as an individual replacement part.