96142003200 Poulan Lawn Mower - Overview

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

This is a genuine OEM sourced replacement part used on lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulch since the smaller clippings will decompose more quickly, releasing their nutrients into the soil. This part is made out of meta...Read morel and it is sold individually. To replace it you would need a wrench to remove the nut that secure the blade.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This is an authentic OEM component from Husqvarna. The drive belt is constructed of rubber composite, and is used in many walking lawn mower engines. Fitted onto the pulleys, the part works as a support to the changing direction of the engine's force. The drive belt is sold individually. A wrench and a screwdriver are required for making the replacement.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This authentic manufacturer-sourced component is specially made for use with Poulan and Husqvarna lawn mowers. It is an identical replacement for a missing or a faulty pawl that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal handle assembly connects to the rear of the deck assembly and is used to mount the upper handle. This item is available as an individual replacement part.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

This is an authentic manufacturer-sourced replacement component which is specially designed for use with Poulan, Husqvarna and Weed Eater walk-behind lawn mowers. It helps to secure a component on a shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

A genuine item which is supplied directly from the original equipment manufacturer for use with Poulan, Husqvarna and Weed Eater lawn and garden equipment. It is one of the special screws for the skirt, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mi...Read morend this high-quality component is made of durable metal and is sold individually.