96012002900 Poulan Lawn Mower - Overview

This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery an...Read mored the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.

This is a genuine replacement part sourced directly from the original manufacturer. This assembly consists of metal parts and it is sold individually. This is the part that houses shaft that mower blade attaches to, it is mounted to the deck of the mower by three (3) bolts (sold separately). Please note that the mounting holes on mandrel...Read more housing are not threaded. Bolts that are used to secure the mandrel to the deck are self tapping. When doing this repair you would need a set of wrenches. • First remove the blade from the mandrel shaft • Remove the three (3) screws that are holding mandrel to the Deck • Then, you will need to remove the nut that is attached to the mandrel shaft, which is located above the mandrel pulley. The complete mandrel assembly should come right out now. • Attach the new mandrel assembly back to the deck • Attach and secure pulleys, belts and blades

This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.

This item is sourced from the original manufacturer. It is an authentic part used with riding lawn tractors/mowers. This is the switch that allows user to engage blades. To stop mower blades, place attachment clutch control in the "DISENGAGED" position. One (1) plastic switch is included per order. Mechanical switches tend to break with t...Read moreime, eventually requiring replacement. This is standard 8 terminal black switch. Replacing this switch is a simple task. • Make sure to disconnect spark plug • Once you gained access under the housing disconnect wires • Remove old switch by pushing on side tabs • Secure new PTO switch • Reconnect wires and spark plug • Test the unit

This lightbulb is supplied by the original manufacturer and intended for use in lawn tractors and riding mowers with a 12-volt system. It is positioned on the front of the equipment as part of the equipment lighting system. The lightbulb illuminates the area allowing for improved visibility when working in low-light conditions. The lightb...Read moreulb can fail due to various reasons, such as burnout, electrical issues, or physical damage. Once the lightbulb stops functioning, visibility will be reduced which makes it difficult to safely operate the equipment. Before you begin the repair, disconnect your equipment from the power source to avoid electrical hazards. Remove the bulb housing cover, and carefully unscrew the old bulb. Thread the new bulb into the housing and ensure that it is securely seated. Finally, reattach the housing cover, reconnect the power supply, and test the new bulb. Note that this bulb is part of a dual usage system, therefore ensure that you order at least two as each bulb is sold individually.

It is a genuine manufacturer-approved part which is specially designed for Ryobi and Husqvarna riding lawn mowers and garden tractors. The purpose of the switch-interlock is to act as a safety feature which will shut the engine off when equipment is started or running in unsafe operating conditions. Unfortunately, over time parts will wea...Read morer out and it may begin to fail eventually requiring a replacement. Refer to the owner\'s manual and the appropriate diagrams for your model for the correct location and installation of this component. Note, this high-quality plastic body interlock switch is sold individually. You will need a screwdriver to perform this repair.

This headlight switch is designed for use with various models of ride-on mowers/tractors, features an on/off mode for turning the headlines on and off, and is a genuine OEM part. If your headlights do not turn on, it is recommended that you inspect the light bulbs before replacing this switch. It is recommended that if you have a multimet...Read moreer, you test this switch for continuity prior to ordering a new switch. To replace this switch, lift or gain access to the steering housing of the lawnmower. Locate the tabs securing the switch, which will be underneath where they appear on the user interface panel. Push the tabs on the side of the switch inwards to release the switch out from its panel, and then disconnect the wires from the switch, taking note of their positions. Connect the new switch terminals to the previous wires, push the new switch into its panel, and test the lights to make sure they work.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.

This is an OEM part sourced directly from the manufacturer. The bulb socket assembly is commonly found in riding mowers and lawn tractors from Husqvarna, Poulan, and Weed Eater. This part is made of high-quality plastic and metal, and is used to hold the light bulb and provide electricity in the headlamp assembly. This item is available as an individual replacement part.

The footrest pad is made out of plastic. This item is sold individually. This is an authentic Craftsman replacement part that is sourced from the original manufacturer for use with lawn mowers and lawn tractors. A screwdriver might be helpful during the installation of this part. It will require replacing if it breaks.