952Z1P70C0A MTD Engine - Overview

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requirin...Read moreg replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

This Air Cleaner Kit is an OEM part direct from MTD for use in a walk-behind lawnmower. The purpose of the air cleaner is to keep dust and debris from entering the carburetor and engine. This kit includes one paper filter and one foam filter. The paper filter cannot be cleaned and needs to be replaced once a year. The foam filter can be c...Read moreleaned by using liquid detergent and water, replace the foam element when damaged. Never run the engine without the filters as this can result in rapid engine wear.

This fuel cap is a replacement part sourced directly from the original equipment manufacturer. It is not an aftermarket part. This cap is commonly used in lawn mowers made by MTD, Bolens, and Yard Man. It is made of plastic, and its purpose is to prevent fuel from spilling outside the fuel tank. This cap is sold individually, and it requires no tools to replace.

This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bol...Read moret may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.

An oil drain plug is used to provide a convenient, controlled and easier way to drain the oil from the engine and is typically located at the bottom of the machine, screwed into the oil sump/pan. This oil drain plug is compatible with various makes and models of lawn equipment and is made of high-quality metal measuring approximately 1-in...Read morech in length and is sold as an individual part. If you notice oil leaking from your machine, or worse performance from your machine, this drain plug could be missing or damaged. To replace this drain plug, simply unscrew the old drain plug and screw this one in its spot, making sure to tighten it to the manufacturer standard.

It is a genuine OEM sourced replacement part that is specially produced for use with lawn and garden equipment. This is the special thumb screw which is used to secure the air cleaner. It is a high-quality component which consists of a durable black plastic grip with a threaded metal shaft and it is sold individually.

This genuine OEM replacement fuel filter is specifically designed for use with gas-powered lawn and garden equipment. Its primary function is to ensure that fuel delivered to the engine is clean and free from dust, debris, and other contaminants that could impair performance. Constructed from high-quality plastic for durability and reliab...Read moreility, this filter helps maintain optimal engine operation. Over time, the filter may become clogged and restrict fuel flow, making timely replacement essential. This part is sold individually and is compatible with a variety of outdoor power equipment models. Always refer to your equipment’s manual for proper installation and maintenance guidelines.

This is an authentic replacement part that is sourced from the original manufacturer for use with lawnmowers, tillers, and log splitters from MTD, Yard-Man, and Yard Machines. The gasket is used to seal the connection between the body of the carburetor and the air cleaner base. A hex socket wrench is needed for this repair. The gasket is sold as an individual replacement part.

This is a genuine manufacturer approved replacement spark plug. It is an authentic OEM part commonly used on a variety of lawn and garden equipment. The purpose of a spark plug is to deliver electricity from an ignition system to the combustion chamber. Over time spark plugs tend to wear out, get dirty or fouled requiring replacement. Inc...Read moreludes one (1) spark plug per order. You would need a spark plug wrench or a socket wrench to install the spark plug. Please note, after replacing it, you should gap the spark plug according to the owners manual of the outdoor product you have.

This is an original MTD replacement part. The recoil starter assembly is designed by the manufacturer for use in lawn mowers, tillers, and log splitters. This part is a complete assembly used to provide an igniting spark to the engine. You may require a wrench when replacing this item. This part is sold individually.

This is a genuine part that is supplied by the original manufacturer for use with Yard-Man, MTD, Yard Machines, and Cub Cadet lawn mowers. The recoil spring and pulley assembly is coiled tightly into the starter housing. When the starter rope is pulled, the tension on the spring allows the rope to spin fast and send a spark to get the eng...Read moreine going. This part is made of metal and is sold individually. For installation you will need a screwdriver, this spring comes already coiled, so be sure to be careful while handling this part.