952Z170-T0B MTD Engine - Overview

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requirin...Read moreg replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose connection, the nipple may be damaged and requires replacement. When removing the old fuel tank nipple, ensure the tank is empty and the engine ...Read moreis turned off. Use a wrench or pliers to detach the nipple. This high-quality OEM replacement part is sold individually.

This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bol...Read moret may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.

This air cleaner cover, also known as an air filter cover, is used to enclose the air cleaner/filter in lawn and outdoor power equipment. It is an approved OEM replacement part which aids in preventing debris, dust, and other contaminants from entering the engine and disrupting the combustion process. If the air cleaner cover is cracked o...Read morer no longer properly attached to the air cleaner housing, it can lead to contaminants entering the engine, hard starting, stalling, and engine damage. Locate the air cleaner housing on your equipment and remove the fasteners that secure the air cleaner cover to the housing. Carefully remove the cover and inspect the air cleaner to verify that it is still in working condition. It is recommended to regularly replace the air cleaner for optimal engine performance. Position the new cover on the housing and secure it in place with the appropriate fasteners.

This is an authentic replacement part manufactured for use with outdoor power equipment. The carburetor gasket is used to form a seal between the carburetor and the air intake box. It is recommended to replace gaskets when servicing the carburetor to ensure good seals when the parts are reassembled. This gasket is sold as an individual replacement part.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

A breather hose is used within the ventilation system for a crankcase, or engine, to connect the crankcase to the air manifold and allow hot air to escape. This genuine OEM breather hose is made of a high-quality rubber and is designed for use and compatible with several different makes and types of outdoor power equipment, such as lawnmo...Read morewers, tillers, engines, log splitters, and snowblowers. Due to the build material of this hose, it can break down over time and through exposure to gas, oil and excessive heat. If you notice any damage on the hose, fuel leaks or worsened engine performance resulting in rough idling or stalling, this hose may be damaged or simply need replacing. To replace this hose, locate the hose on your model and remove any clamps, before pulling off the old hose and installing the new, with any necessary hardware such as clamps.

An oil drain plug is used to provide a convenient, controlled and easier way to drain the oil from the engine and is typically located at the bottom of the machine, screwed into the oil sump/pan. This oil drain plug is compatible with various makes and models of lawn equipment and is made of high-quality metal measuring approximately 1-in...Read morech in length and is sold as an individual part. If you notice oil leaking from your machine, or worse performance from your machine, this drain plug could be missing or damaged. To replace this drain plug, simply unscrew the old drain plug and screw this one in its spot, making sure to tighten it to the manufacturer standard.

This is an authentic MTD replacement part. The fuel line kit is designed by the manufacturer for use in snowblowers. This part includes the rubber tube and two metal clamps, and is used to carry fuel through the machine. You will require pliers when replacing these items.

This is a genuine OEM replacement part that is intended to be used with tillers from Troy-Bilt, Yard Machines, MTD, and Cub Cadet. The plastic air cleaning housing attaches to the carburetor air intake. This item is used to transfer air from the filter to the carburetor. This air cleaner housing is sold as an individual replacement part.