946105 (000101) Ariens Trimmer - Overview

It is a genuine OEM supplied component which is specially designed for Ariens string trimmers. The guide-height-hex is an important part of the unit which helps to protect the cutter disc. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment operates properly. One durable meta...Read morel guide-height-hex is included. To ensure the correct repair procedure, refer to the appropriate diagrams for your model. You will need a wrench set to perform this repair.

The flange bushing attaches to the speed fork. It is an authentic OEM sourced item which is specially produced for use with Ariens snowblowers and mowers. This part is priced individually. During replacement, it may require a screwdriver and a socket set to help install this part correctly. It will require replacing if it breaks.

This is an authentic Ariens replacement part manufactured for use with walk behind trimmers. The control cable is used as a linkage between the bail on the handle and stop switch on the engine. Cables can break at the ends or can be bent and a broken or damaged cable will not allow the engine to start. This cable is available as an individual replacement part.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This tension spring, also known as a coil spring or extension spring, is an authentic manufacturer replacement part used in a variety of outdoor power equipment. It is a cylindrical, steel spring with one hook/ring on each end, which is used to hook on to the equipment parts. The spring is responsible for providing tension or resistance t...Read moreo various parts for controlled movement and added stability. It is typically located in areas such as throttle controls, idler pulleys, and belts. The tension spring can rust or break over time, leading to loose components, equipment instability, and potentially causing damage. To remove and replace the tension spring, use needle nose pliers or a spring hook tool to grab the hooks and gently pry them off. Hook the new spring on the attachment points and ensure that it can maintain the required tension.

This authentic manufacturer-sourced part which is specially made for use with Ariens string trimmers. It is an identical replacement for a missing or a faulty guide that helps to support the cutting head, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in...Read more mind this high-quality part is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately.

This string trimmer shield protects the belt, pulley, and cutting components by blocking debris thrown during operation. Made from durable material, it helps prevent damage and reduces wear on exposed parts. Replacing a cracked or missing shield restores proper protection and safe, reliable trimmer operation.

This replacement v-belt is supplied directly from the original equipment manufacturer for use with Ariens trimmers. It is the main belt which drives the unit, over time the material may wear out and stretch eventually requiring a replacement. Please note this high-quality rubber belt is sold individually.

This is an original Ariens replacement part manufactured for use with walk behind trimmers. Throttle cables can break at the fitting end where it connects to the carburetor, or the cable can kink either way it would need to be replaced. This cable comes with the control lever making installation easier, the throttle control is sold individually.