938025 (004837) Ariens Snow Blower - Overview

This manufacturer-sourced replacement screw is designed for use with Ariens snow blowers and throwers. As a standard hardware component, it has multiple potential applications depending on the model. Made of durable metal, this part is sold individually. A wrench is required to tighten or loosen the screw during installation or removal. For proper use and placement, please refer to your equipment’s diagrams.

Often located on the front gear shaft, this Roll Pin has been sourced directly from the original manufacturer for use on various machines. It is 1-1/4 inch in length, made of durable black metal, is not part of a kit or assembly, and is sold individually. In order to complete this repair, you will need pliers, a screwdriver, and a hammer and tap. Customers rate this repair as Easy.

The Cable Pulley mounts to the cable pulley bracket on the frame, and allows the cable to move easily and not rub on anything. This part will require a wrench or socket, and its installation is rated as "Easy" by customers. For maintenance, it requires lubricant to stay smooth. When broken, damaged, or worn down, the part may jam and shou...Read moreld be replaced. Refer to your model, make, and diagrams to check if this is the right part.

This is a manufacturer-approved carriage bolt designed for use with Ariens snow blowers and snow throwers. Made from durable metal, this standard hardware component is suitable for a variety of applications. The bolt features a square section beneath the rounded head, which fits securely into a matching square hole in the workpiece. This ...Read moredesign prevents the bolt from turning when the nut is tightened, ensuring a secure and stable fit. Sold individually, this bolt is a reliable replacement part. For proper installation and compatibility, please refer to your equipment’s diagrams or user manual.

This carburetor meters fuel and air for the engine on select snow-removal and walk-behind equipment. Sealing gaskets are included to support installation and help prevent air or fuel leaks at the mounting surfaces. A carburetor problem may cause hard starting, surging, stalling, flooding, or poor response, but fuel supply, ignition, choke...Read more operation, and old fuel should also be checked. Confirm the equipment model, serial number, engine model, linkage arrangement, fuel connection, and mounting pattern before ordering this assembly.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It plays a key role in securing the skid shoe runner to the deck, helping to maintain proper alignment and performance. The lock nut is engineered to resist loosening when properly threaded onto a bolt, ensuring a secure and lasting fit. Made from dura...Read moreble metal, this high-quality part is sold individually. For safe and effective installation, use a properly sized wrench.

This is a genuine Ariens replacement part. The locking washer is designed by the manufacturer for use in snowblowers and snow brushes. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to...Read more be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.