93603700 Ariens Lawn Tractor - Overview

The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.

This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is da...Read moremaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to...Read more maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.

This lawn tractor mandrel assembly supports and drives the mower blade, ensuring smooth and stable rotation during operation. Built as a durable, all-in-one unit with internal bearings and shaft, it helps maintain consistent cutting performance while protecting the mower deck from impact damage. Replacing a worn or damaged assembly can restore proper blade function and ensure reliable, even cutting results.

This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery an...Read mored the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This item is available as an individual replacement part. The metal muffler connects to the exhaust tube and helps to reduce the noise from the exhaust. Over time this part may rust and will need to be replaced and may require a socket set and a wrench during replacement. This part is an OEM sourced directly from the manufacturer for use ...Read morein Ryobi lawn tractors, Husqvarna ride mowers, Poulan lawn tractors, and Jonsered tractors.

This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.

This genuine Craftsman right-side spindle assembly is designed to securely attach the front wheel to the front axle of your lawn tractor. Made from durable metal and sold pre-assembled, it offers a reliable and time-saving replacement solution. Installation Tip: You may need pliers, a socket set, and a screwdriver to complete the insta...Read morellation. For best results, consult your model’s diagram to confirm compatibility before purchase.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmower engines from Ryobi, Husqvarna, and Poulan. The metal tube is used to link the exhaust port on the cylinder to the muffler assembly. This exhaust tube is priced as a single item.

It is a genuine OEM supplied component that is specially produced for use with riding lawn mowers. This replacement gasket is used to create and air-tight seal for the exhaust tube, please make sure to check appropriate diagrams of your unit for correct location and use of this item. Over time gaskets tend to get compressed and may crack ...Read moreeventually requiring replacement. It is made of durable composite material and it is sold individually.