932022 (000101) Ariens Snow Blower - Parts

This shear bolt is made to break when the machine meets too much force, which can help protect other parts from damage. It is intended for listed compact equipment setups. Replace a broken shear bolt only with the correct size and strength. A standard bolt may not break as needed. Check the equipment manual and compare the bolt length, wi...Read moredth, thread, head, and rating with the original fastener before ordering or installing this replacement. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing. This is a genuine OEM part sourced from the manufacturer directly.

The Runner is a 6 x 3.5 inch, orange, metal part which is used to allow the snowblower to glide smoothly on the ground. It's installed using a wrench or socket, and its installation has been rated "Easy" by customers. If broken, the auger housing will drag on the ground and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part.

This is an authentic Ariens replacement part manufactured for use with snow throwers. The special scrapper attaches to the bottom of the back of the auger housing and used to collect snow from the ground to be fed into the auger. This scraper is a wear item because it wears against the ground during use. Replacing the scrapper is part of normal maintenance, please note the scrapper is sold individually.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Ariens snowblowers. The scraper blade attaches to the bottom of the auger housing, to protect the housing and augers from ice and other debris. This part is made of durable plastic and is sold individually. Before installation, be sur...Read moree to remove the ignition key. You will need a socket wrench to aid you in this repair.