927S Husqvarna Snow Blower - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the right skid plate is sold separately. It is advised to replace both skid ...Read moreplates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

The deflector spring is made of metal and attaches to the deflector assembly. This spring is available as an individual replacement part. It will need replacement if it becomes stretched or broken. It is used in Husqvarna, Poulan, and Jonsered snowblowers and is an OEM from the manufacturer.

This replacement scraper bar is an authentic OEM supplied item that is commonly utilized on Poulan and Husqvarna snow throwers. It is secured behind augers to scrape up the snow that is left behind. This durable metal item is sold individually, please note the hardware to secure this bar is sold separately. You should only need a wrench to replace this part.

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

This Husqvarna belt is used in snowblowers. It is an OEM part sourced directly from the manufacturer. The impeller belt goes around the impeller pulley and helps to link rotating shafts. The belt I made of flexible material and will need to be replace if it becomes worn or stretched. This item is priced individually.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade gets caught or stuck the force will snap the bolt rather than breaking more expensive parts like the auger transmission. The bolts are sold in ...Read morepairs and include the nuts and washers, the bolt sets are sold as individual sets.

This is a genuine replacement part sourced from the original manufacturer for use with snow blowers made by Husqvarna and Poulan. This part attaches to the drive control rod and manages the movement of the shift lever. You will need pliers to replace this part. This spring traction drive is sold individually and made of metal.

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the left skid plate is sold separately. It is advised to replace both skid p...Read morelates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts