This is a genuine Coleman replacement tent pole. This features a hollow fiberglass pole with a 6.3 mm diameter. The parts for one individual pole are included; there are five 30" pole sections. This part requires some light assembly prior to use.
This is a thermostat, also known as a temperature control thermostat. This part regulates the temperature. When the refrigerator reaches the desired temperature, the thermostat interrupts the flow of electricity to the compressor, which stops the cooling process. The thermostat may be defective if you notice that your fridge is exceeding ...Read morethe desired temperature (food is freezing). It may also incessantly run. This part is 3.4 inches in length, 3.2 inches in width, and 3.2 inches in height. The thermostat is located on the lower left side at the back of the appliance. Make sure you disconnect the unit from the power source before you begin.
This is a genuine Coleman kit made for repairing tent roof poles. It fits either the side roof pole or the main roof pole, found as part # 5010000549. This kit includes five fiberglass pole sections, two metal end caps, two metal connector pieces, a fiberglass end piece, and the stretchy center shock cord. The fiberglass sections can be trimmed to size as needed.
This white full wire shelf is an authentic OEM replacement part for refrigerators. It has dimensions of 10 inches by 15 inches and it is placed along the entire width of the refrigerator compartment. The shelf provides a stable and durable surface for storing food items and its placement can be adjusted according to your needs. Over time ...Read morethe shelf can break, bend, or become warped, due to age or excessive weight. It is important not to overload your shelf as this can lead to premature failure. Replacing the shelf is a simple repair that does not require specialized tools. To remove the old shelf, simply lift it upward to disengage it from the support brackets and pull it out of the refrigerator. Position the new wire shelf on the brackets and ensure it is well aligned.
This is a flexible fiberglass pole with a 6.33mm diameter. It is an authentic OEM part sourced directly from Coleman. Note that the rubber end tips, metal end tips, metal connection pieces, and one 11' shock cord are included in this kit. It is one pole split into five pieces; some light assembly will be required before use.
This is a genuine Coleman replacement tent pole. This is a standard-style tent pole made of fiberglass material. Includes five sections, one shock cord, and two vinyl end caps. The repair kit for this pole is found under part # 5010000539. This part will require light assembly before use.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The old thermostat would freeze everything even at the lowest setting.
16 of 19 peoplefound this instruction helpful.
Gerald from JACKSONVILLE, AR
Easy
15 - 30 mins
Screw drivers
It was a simple matter of removal and replacement. The process was intuitive and very easy to do. Removal the old thermostat, extend the sensing tube and secure the tube to the bottom of the freezer compartment. Plug it back in, turn it on to the middle setting and see what happens. It worked and it was much cheaper than replacing th
... Read moree otherwise good mini-fridge. Take a picture before you take anything apart, use your picture to guide the replacement.
Read less
Was this helpful?
Thank you for voting!
defective thermostate
2 of 4 peoplefound this instruction helpful.
carl from PHILADELPHIA, PA
Easy
30 - 60 mins
Screw drivers
open frig cabinet - disconnect old part - replace with new part -very straight foreword