924125 (000101) Ariens Snow Blower - Overview

Diagrams for 924125

See every part. Know exactly what you need.

Parts for the 924125

$8.37

Shear Bolt Service Assembly

Part #51001500

This OEM-verified shear bolt, measuring 2-1/8 inches in length and 5/16 inches in diameter, is designed to break under excessive force to protect your lawn equipment by absorbing the impact. Specifically, it allows the augers of your machine to stop while the shaft and gear case continue to rotate. To check if the shear bolt is broken, in...Read more

Read less

$46.95

Disc- Friction

★★★★★

(1)

Part #09475300

The Friction Wheel is part of the clutch assembly, which helps to drive your unit. If broken from being worn down, you will have drivability problems and should replace the part. This part is metal with a rubber outer ring, and comes in white/black. Installation will require a wrench set, socket set, and pliers and is rated as "Medium" di...Read more

Read less

$26.35

Skid Shoe- Reversible - Orange

★★★★★

(3)

Part #02483859

The Runner is a 6 x 3.5 inch, orange, metal part which is used to allow the snowblower to glide smoothly on the ground. It's installed using a wrench or socket, and its installation has been rated "Easy" by customers. If broken, the auger housing will drag on the ground and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part.

$6.55

Pin-lok .31x1.75

Part #07053700

This metal pin is priced as an individual replacement part. It attaches to the wheel and locks the wheel in place to help increase traction. Pliers may be needed for replacing this part if it becomes lost or broken. This item is supplied by the original equipment manufacturer for use with Ariens snowblowers.

$25.25

V-belt- 3l-raw Edge

Part #07211200

This traction drive v-belt is a genuine replacement part. It is supplied directly from original equipment manufacturer for use with Ariens lawn and garden equipment. This is the main drive belt that helps to drive the equipment. To ensure correct applications please make sure to check appropriate diagrams. When replacing a belt it is advi...Read more

Read less

$6.55

Pin-roll .250x1.75

Part #05803700

This roll pin is a genuine OEM part that is designed for use with various makes and models of snowblowers and lawn tractor snowblower attachments. Made of metal and sold as an individual part, this pin features a 0.25-inch diameter and 1.75-inch length. This pin is hollow and features a split lengthwise down the middle to allow it to fit ...Read more

Read less

$6.55

Pin- Spring Clip

★★★★★

(1)

Part #06714500

It is a genuine OEM sourced replacement part, it is specially designed for use with Ariens snowblowers. This spring clip pin has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. Note this durable metal item is sold individually.

Nut, Locking Top Flange .31-18

Part #06543100

$27.95

Cap- Fuel - Tecumseh

Part #07531800

This is a genuine manufacturer-sourced replacement component which is specially produced for use with Ariens snowblowers. It is designed to keep the fuel in the tank. Keep in mind this high-quality part is made of durable plastic and is sold individually.

$15.35

Chute Gear

Part #03222900

This chute gear in your snowblower is a plate-like part found in the discharge chute crank mechanism. It is responsible for controlling the movement of the chute, allowing you to direct the snow being discharged. The gear attaches to the chute and is rotated by a pinion gear. If the chute gear is broken, you may notice chipped or missing ...Read more

Read less

$9.85

Bshg-flg Split Nyliner 1.0-inc

Part #05500030

This flange split bushing is a genuine OEM part used to add stability and reduce friction damage between rotating parts, such as drive shafts and gears, in a variety of outdoor power equipment. The bushing has an outside diameter of 1 1/3 inches and an inner diameter of 1 inch, as well as a flange on one end which prevents the bushing fro...Read more

Read less

$6.55

Bshg-flg .625x.750x.500x.875

Part #05500111

This OEM-sourced flange bushing supports smooth movement in your lawn equipment by reducing friction. This bearing has an inner diameter of 0.625 inches, an outer diameter of 0.750 inches, a width of 0.5 inches, and a flange diameter of 0.875 inches. Depending on the model and make of your machine, this bushing can be found in various par...Read more

Read less

Questions And Answers for 924125

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Larry - For model number 924125

October 7, 2021

Sir, I need part number for an electric starter for this unit. Possible a price for starter. Thanks Larry

Hello Larry, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the Engine. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

1 person found this instruction helpful.

Was this helpful?

Joe - For model number 924125

January 12, 2024

Adj speed control

Helo Joe, thank you for contacting us. To adjust, place the unit into a service position. Remove hairpin from adjustment pivot pin. Pull shift rod and pin out of speed selector lever. Place the speed selector in the fastest reverse speed position. Pull the shift rod straight up towards the control panel as far as it will go. Thread the adjustment pivot pin along the shift rod until it aligns with the mating hole on the speed selector lever. Insert the pivot pin into the hole. Make sure the speed selector shifts into each speed position. Secure adjustment pivot pin with hairpin. We hope this is helpful!

1 person found this instruction helpful.

Was this helpful?

Brian - For model number 924125

February 15, 2025

What size belts does the take for the auger I can’t read the numbers on old belt. Lowes gave me the wrong belt

Hello Brian, thank you for your question. The correct Auger Belt is PS8802493. The dimensions are 471" X 35.51" Raw Edge Kevlar. We hope this helps.