9214 - Overview

The battery charge rectifier goes inside the control box. It is an OEM from Briggs & Stratton for use in generators. This part is sold individually and is made of metal. A wrench and a screwdriver may be required to replace this part. It will need to be replaced if it breaks.

This item is available as an individual replacement part. The outlet is made out of metal and plastic. It may require a wrench during installation. This item will need to be replaced if it breaks. It is a replacement part directly sourced from the manufacturer for use in generators made by Briggs & Stratton and Snapper.

This is an OEM part sourced directly from the manufacturer. The brush is designed for use in generators from Briggs & Stratton. This part is a complete carbon brush assembly, which is used to supply power to the rotor. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.

This is an authentic OEM sourced item which is specifically produced for use with pressure cookers made by Mirro, T-Fal, and Wearever. It fits between the stainless steel cover and the filter. If this part becomes stripped or lost it will need to be replaced. A wrench may be needed to replace this item. The metal nut is sold individually.

It is a genuine item that is supplied by the original manufacturer for use with pressure cookers. This replacement filter helps to ensure the steam coming out of the safety valve does not contain any particles that may clog it up. Please note this durable, high-quality metal filter is sold individually.

This is a factory original part. The Safety Valve is used on many models of pressure cookers. The Valve includes a gasket and retaining nut. This Valve is designed to open and relieve excess pressure safely. This Valve should be replaced if it opens at lower pressures or leaks. To install this part you will need to use a wrench and possibly a hammer to gently tap out the old valve.

The metal safety valve fits between the functioning safety valve and the stainless steel cover. This authentic replacement part is used in pressure cookers made by Mirro, T-Fal, and Wearever and is priced as an individual replacement. The safety valve is designed to release the air inside the presser cooker if the pressure becomes too high.