919-72413 (Type 0) Black and Decker Compressor - Overview

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

This power cord is a genuine high quality item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with electric air compressors. It is connected to a standard US outlet to supply power to the unit. Please note, this rubber insulated power cord is sold individually. You will need a screwdriver to replace this item.

This replacement tube seal is a high quality item that is supplied by original equipment manufacturer for use with Craftsman air compressors. It is placed on the outlet tube coming from the head of the compressor. Please note this durable rubber tube seal is sold individually.

Genuine OEM replacement part, this item is sold individually. This part is used in various places in the compressors listed below. By its part name, it is used to clamp hoses onto certain parts on the compressors.

Genuine OEM replacement parts kit. This Gasket Kit is used to prevent air leaks in the compressors listed below. Over time the gaskets will become compressed or cracked and you will hear an air leak coming from the compressor. They will need to be replaced. This would be a good time to inspect all the other wear parts of the compressor.

Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valv...Read moree plate will need to be replace. It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.

This is an OEM part sourced directly from the manufacturer. The belt is commonly found in Craftsman air compressors. This part is made of flexible rubber, and is used to transfer power between the piston and the pump assembly. Over time, it may become cracked and brittle, requiring replacement. You may need an Allen wrench or hex key when replacing this part. This item is sold individually.

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by te...Read morension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.

This is an OEM part sourced directly from the manufacturer. The nut sleeve is designed for use in Craftsman air compressors. This part is made of metal, and is generally used in securing the check valve. You may require a wrench when replacing this part. This item is sold individually.

The gauge attaches to the pressure switch and is made of plastic and metal. It is an authentic OEM sourced item which is specially produced for use with compressors made by Porter Cable, DeVilbiss, and Black & Decker. This item is available as an individual replacement part. A wrench set may be helpful when replacing this part. This item may stop working and will need to be replaced.

This replacement piston kit is designed for use with select air compressors and includes everything you need to restore smooth, efficient operation. The kit comes with a piston rod, compression ring, cylinder sleeve, and bearing—all made from durable materials for long-lasting performance. These components work together to maintain proper...Read more compression and airflow inside the unit. Please note that this kit does not include the valve plate, head gaskets, or other compressor parts. To install, you’ll need a screwdriver, hex key (Allen wrench), and pliers. Replacing worn or damaged internal parts can help improve your compressor’s performance and extend its service life. This kit is sold individually and is ideal for routine maintenance or repair.

This is a genuine manufacturer-sourced replacement gasket, it is specially designed for use with Craftsman air compressors. It is utilized to provide an air-tight seal for the cylinder head, over time it may begin to wear out and crack eventually requiring a replacement to maintain peak performance. Please refer to the appropriate diagram...Read mores of your model for the correct location and use of this hardware. This high-quality component is made of durable composite material and it is sold individually.