917773420 Craftsman Trimmer - Overview

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This replacement belt is a genuine item that is sourced directly from original equipment manufacturer. It is commonly used v-belt for high wheeled trimmers. This is the the main belt that drives the cutter head. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. This part is made out of rubber ma...Read moreterial and it is sold individually. To complete this repair you will need a set of wrenches and a screwdriver. • First remove screw at front of chassis cover • Lift cover up and away from trimmer • Remove the two (2) screws on sides of trimmer securing the debris shield • Turn trimmer on its side with carburetor and fuel cap up • Remove the two (2) screws on under-side of trimmer securing the debris shield • Slide the debris shield rearward and remove • Remove belt from engine pulley on crankshaft • Remove belt from trimmer head pulley • Note the position of the control cable and idler return spring • Remove idler assembly from chassis and re-move belt and idler from trimmer • Remove belt from idler assembly by removing bottom belt keeper and idler pulleys • Assemble new belt, idler pulleys and bottom belt keeper to idler bracket • Tighten pulley bolts securely • Position belt and idler assembly in trimmer, reconnect idler spring and reattach idler to chassis

This is a genuine replacement bottom deflector which is supplied by the original equipment manufacturer for use with handheld trimmers. It is mounted over the cutting head assembly in order to direct the trimmings away from the user and provide the protection from the string while operating the equipment. This high-quality component is ma...Read morede of durable black plastic and it is sold individually, please note the hardware to secure it is sold separately.

This is an authentic OEM part for use with Husqvarna, Poulan, Weed Eater and Jonsered Trimmers. The Spindle bearing cover attaches above the mow ball bearing to prevent dust and debris from entering the upper bearing. This part is sold individually. The tool that you will need to replace the bearing cover is a socket set.

This is a genuine Craftsman Part for use with Line Trimmers. The idler arm return spring returns the idler arm into position, releasing tension on the belt. The most common reason for replacing the spring is if the blades won't turn. This part is sold individually. The tool that you will need to replace the Idler return spring is Pliers.

This is an authentic replacement part manufactured for use with high wheel trimmers. The retaining ring is commonly used to secure the bearing cover to the jackshaft. This retaining ring is available as an individual replacement part, please see model diagram for associative parts.

This is an OEM part sourced directly from the manufacturer. The shoulder bolt is commonly found in lawn mowers from Poulan, Weed Eater, and Husqvarna. This part is made of metal, and is generally used to secure the axle arm that holds the wheels. Please be aware that there are different bolts used in the machine. Refer to the parts di...Read moreagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The shoulder bolt is available as an individual replacement part.

This is an authentic OEM part four use with Husqvarna, Poulan, Weed Eater Trimmers. The shaft rotates the cutting head on the line trimmer. The most common reason for replacing the shaft is if it is damaged or if the trimmer head will not rotate. This part is sold individually. The tools that you will need to replace the shaft are a T-25 Torx head screwdriver and a 7/16 inch wrench.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman lawn mowers. The wheels allow you to easily propel your mower from place to place. This part is made out of plastic and is sold individually. Before installation, make sure the engine has cooled, and disconnect the wire and boot from the spark plug. For installation, you will need a socket wrench.

This is an Authentic OEM part for use with Poulan, WeedEater, and Husqvarna Lawn Mowers. The starter rope guide kit attaches the engine starter rope to the lawn mower handle for easy access when starting the engine. This part includes the T-knob and the rope guide the starter rope is not included. There are no tools needed to replace this part.