917299680 Craftsman Tiller - Overview

This is an original part from Husqvarna. The hood latch is constructed of flexible plastic, and is made for use with many riding lawn mowers. This component is fastened onto the lower bagger chute, latching it to the upper chute. The hood latch is sold individually. A pair of pliers and a screwdriver may be helpful for the removal and replacement.

This needle bearing is sourced from the original equipment manufacturer for use in lawn and garden equipment. It is a cylindrical roller that allows the rotating parts such as the drive shaft to move smoothly and avoid friction damage. The bearing is made from steel and designed to withstand heavy loads, and harsh outdoor conditions. Over...Read more time the bearing may wear down from lack of lubrication, or damage from the heavy loads and impacts. If the needle bearing is faulty, you will notice excessive vibration, grinding and squeaking noises, and overall lower performance from your equipment. Carefully remove the old bearing from your equipment using bearing pullers and clean the area thoroughly to ensure a good fit for the new bearing. Lubricate the new bearing and press it into position to complete your repair.

t is an authentic replacement bearing that is supplied by the original equipment manufacturer for use with garden tillers. Needle bearings are used to reduce friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Symptoms of a faili...Read moreng bearing may include squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This is a genuine Husqvarna part for use with Tillers. The tine digs into the ground to till the soil. The most common reason for replacing the tine is if it is worn. This part is sold individually and there are no tools needed to replace this part.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special needle bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This needle bearing is available as an individual replacement part.

This is a genuine replacement part sourced from the original manufacturer for use with tillers made by Weedeater, Husqvarna, Jonsered and Poulan. This part goes into the ground to turn the soil. It is recommended to wear gloves to replace this left-hand tine. You will need a wrench set and socket set to replace this part. This left-hand tine is made of metal and sold individually.

The thrust washer fits next to the ring and the 16 gauge washer. This is an authentic Craftsman replacement part used in compatible lawn tractors. This item is priced as an individual replacement. It is made of metal and may require a pair of pliers during the replacement of this part if it becomes broken.

Steel balls serve various purposes throughout power equipment, being used within bearings, valves, pulleys, and clutches. Depending on the use for your equipment, these balls can serve different purposes, but these are designed for use within tillers and lawnmowers, and work within shift fork mechanisms, and lock/align with notches on the...Read more mating component, to prevent unwanted shifting or disengagement during operation. This kit comes with 12 steel balls and is an OEM part, without any other hardware. To avoid problems with your equipment and avoid constant repairs of its steel balls in the future, make sure that they are cleaned, lubricated and regularly inspected before and after each use. If you notice issues with gear shifting such as slipping or difficulty engaging the gear, these balls may be worn down and inoperable, and will need replacing immediately. To replace these balls, the process may look different for each model, but generally it will require a screwdriver and socket wrench to access the mechanisms. Make sure to clean and adequately lubricate the mechanisms, according to the manufacturer specifications.

It is a genuine OEM item that is made for Craftsman lawn and garden equipment. This is a special component which helps to provide a tight fit for the connected parts. Over time it may wear out and get compressed eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality seal is made of durable metal and is sold as an individual item.

It is an authentic replacement part that is supplied by the original equipment manufacturer for use with lawn and garden equipment. The bearing allows connected components to rotate with minimum friction, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over tim...Read moree it may wear out and begin to fail eventually requiring a replacement, keep in mind this durable metal bearing is sold individually.

It is an authentic OEM sourced part which is specially designed for use with Poulan, Husqvarna and Weed Eater tillers. This component is generally utilized to provide a tight seal between connected pieces, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Please make sure to refer to th...Read moree appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality washer is made of durable metal and is sold individually.

This replacement item is supplied by the original manufacturer for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty locknut that was installed on a new unit. This is a standard hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your mode...Read morel for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold in a pack of eight.