917299253 Craftsman Tiller - Overview

This is an authentic OEM sourced replacement component which is specially produced for use with Craftsman tillers. It is the main chain that helps to drive the unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time the chain may wear out and stretch event...Read moreually requiring a replacement to ensure peak performance. Keep in mind this high-quality metal part is sold individually.

Measuring approximately 1-inch in length, this handle lock is designed for use with various models of tiller machines. This handle lock is fastened to the base of the handle to secure the lock lever and is a genuine OEM metal part. This part is sold individually, so depending on your model, you may need 2 of them. Be sure to check your user manual or any diagrams for confirmation.

It is a high-quality item that is supplied directly from original equipment manufacturer for use with lawn and garden equipment. This specially designed rivet has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. It is made of durable metal and it is sold individually.

This needle bearing is sourced from the original equipment manufacturer for use in lawn and garden equipment. It is a cylindrical roller that allows the rotating parts such as the drive shaft to move smoothly and avoid friction damage. The bearing is made from steel and designed to withstand heavy loads, and harsh outdoor conditions. Over...Read more time the bearing may wear down from lack of lubrication, or damage from the heavy loads and impacts. If the needle bearing is faulty, you will notice excessive vibration, grinding and squeaking noises, and overall lower performance from your equipment. Carefully remove the old bearing from your equipment using bearing pullers and clean the area thoroughly to ensure a good fit for the new bearing. Lubricate the new bearing and press it into position to complete your repair.

This is an original replacement part manufactured for use with garden tillers. This bearing is commonly used to reduce friction between the ground shaft assembly and the right-hand side gearcase. The special bearing is available as an individual replacement part, please see model diagram for associative parts.

t is an authentic replacement bearing that is supplied by the original equipment manufacturer for use with garden tillers. Needle bearings are used to reduce friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Symptoms of a faili...Read moreng bearing may include squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This is a genuine Husqvarna part for use with Tillers. The tine digs into the ground to till the soil. The most common reason for replacing the tine is if it is worn. This part is sold individually and there are no tools needed to replace this part.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special needle bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This needle bearing is available as an individual replacement part.

This shift fork spring is found in your outdoor power tools. It helps you to control the speed and power of your machine by engaging and disengaging the gears in the gearbox. When the spring is broken, your machine will make grinding noises or jerk when you try to shift gears. If you overlook a damaged spring, it may lead to severe damage...Read more to the gear mechanism, which can result in costly repairs later. To remove the spring, start by turning off your machine and disconnecting the spark plug. Once you have access to the gearbox, locate the spring. It Is usually connected to the shift fork mechanism, but since the location can vary depending on the model and make of your machine, you will need to consult your user manual. Use pliers or a screwdriver to gently release tension on the spring. This may involve carefully compressing it or unhooking it from specific attachment points. Please be aware that this OEM metal spring is sold individually and is not included with the shift fork.

This is a genuine replacement part sourced from the original manufacturer for use with tillers made by Weedeater, Husqvarna, Jonsered and Poulan. This part goes into the ground to turn the soil. It is recommended to wear gloves to replace this left-hand tine. You will need a wrench set and socket set to replace this part. This left-hand tine is made of metal and sold individually.

Steel balls serve various purposes throughout power equipment, being used within bearings, valves, pulleys, and clutches. Depending on the use for your equipment, these balls can serve different purposes, but these are designed for use within tillers and lawnmowers, and work within shift fork mechanisms, and lock/align with notches on the...Read more mating component, to prevent unwanted shifting or disengagement during operation. This kit comes with 12 steel balls and is an OEM part, without any other hardware. To avoid problems with your equipment and avoid constant repairs of its steel balls in the future, make sure that they are cleaned, lubricated and regularly inspected before and after each use. If you notice issues with gear shifting such as slipping or difficulty engaging the gear, these balls may be worn down and inoperable, and will need replacing immediately. To replace these balls, the process may look different for each model, but generally it will require a screwdriver and socket wrench to access the mechanisms. Make sure to clean and adequately lubricate the mechanisms, according to the manufacturer specifications.