EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

911951 Kenmore Range - Overview

Models starting with 911951

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB44K5012
$47.40
In Stock
Bake Element
★★★★★
★★★★★
(82)
Part #WB44K5012
At the floor of your electric oven is the bake element. This partially open-style element comes with push-on terminals. The bake element will likely provide most of the heat for baking. Therefore, if the oven is not heating properly, or if food is burnt on top and undercooked below, your bake element may be at fault. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, use a multi-meter to test for electrical continuity to see if the element needs replacing.
Bake Element - Push On Terminals - 240V – Part Number: WB44T10010
$83.11
In Stock
Bake Element - Push On Terminals - 240V
★★★★★
★★★★★
(141)
Part #WB44T10010
This is an OEM bottom bake element for your oven. Make sure to wait until your oven is cool before replacing this part, and disconnect power to the oven. In order to replace this part, you will need to pull out the oven and open up the back panel to disconnect the bake element wires and install the new ones.
Door Handle End Cap – Part Number: WB7X7183
No Longer Available
Door Handle End Cap
★★★★★
★★★★★
(43)
Part #WB7X7183
This oven door handle end cap is used on both the left and right hand sides. Sold individually.
Light Bulb - 40W – Part Number: 40A15
$21.95
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(10)
Part #40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
Oven Rack – Part Number: WB48T10011
$64.75
In Stock
Oven Rack
★★★★★
★★★★★
(19)
Part #WB48T10011
Sold individually.
Broil Element – Part Number: WB44T10009
$85.35
In Stock
Broil Element
★★★★★
★★★★★
(31)
Part #WB44T10009
This broil element is found on the upper part of the oven cavity.
Range Surface Element Control Switch - 6 Inch - 1560 W – Part Number: WB24T10029
$52.95
In Stock
Range Surface Element Control Switch - 6 Inch - 1560 W
★★★★★
★★★★★
(19)
Part #WB24T10029
This surface element control switch, also known as an infinite switch, regulates the power supplied to a 6-inch, 1560-watt heating element on electric ranges. It allows for precise adjustment of heat levels by cycling the element on and off, rather than relying on fixed temperature settings. Operating at 240 volts and drawing between 4.4 to 7.4 amps, the switch ensures consistent and responsive heat control. Replacing a faulty switch can resolve issues such as the element not heating, staying stuck on high, or fluctuating in temperature. This component is essential for maintaining safe and efficient cooking performance.
Oven Light Housing – Part Number: WB08T10002
$39.95
In Stock
Oven Light Housing
★★★★★
★★★★★
(12)
Part #WB08T10002
The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, with an outside diameter of roughly four inches by four inches. To install this part, you will need a Phillips screwdriver, a nut driver, and a pair of pliers.
Range Oven Door Gasket – Part Number: WB04T10086
$55.21
In Stock
Range Oven Door Gasket
★★★★★
★★★★★
(13)
Part #WB04T10086
The oven door gasket creates a seal between the oven door and the opening of the oven to prevent heat from escaping when the oven is closed.
Foot - Leveller – Part Number: WB02X10521
$25.26
In Stock
Foot - Leveller
Part #WB02X10521
Sold individually.
Screw – Part Number: WH2X930
$16.05
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WH2X930
This screw is sold individually.
Large Haliant Burner with Limiter - 8" – Part Number: WB30T10045
$133.95
In Stock
Large Haliant Burner with Limiter - 8"
★★★★★
★★★★★
(5)
Part #WB30T10045
This haliant burner element is a gneuine OEM replacement part for your stove. This element is 8 inches in diameter. The element lies underneath the stovetop, and will need to be replaced if it stops heating. To complete this repair you will need a 1/4 inch nut driver and a flat blade screwdriver. To access the element, open the oven door and unscrew the two screws under the lip of the cooktop.

Exact Part matches for your search term

DETERGENT CUP - CANADA – Part Number: 911951
No Longer Available
DETERGENT CUP - CANADA
This part number matches the current model number 911951
Part #911951

Common Symptoms of models starting with 911951

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element cracked on its own
627 of 638 people found this instruction helpful.
  • Timothy from Cordova, TN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, fl ip breaker back, turn on for a few minutes to make sure it works. Piece of cake.
Was this helpful?
Thank you for voting!
Oven took 30 minutes to get to 380 degrees-no hotter
388 of 392 people found this instruction helpful.
  • Sandra from Hayward, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who ha d already done it. That's the only reason I'm submitting my storey. Thanks
Was this helpful?
Thank you for voting!
Bake Element burned out, bunt like a sparkler.
353 of 377 people found this instruction helpful.
  • Brad from Bedford, KY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Ordered the part on Friday, got it on Saturday, very impressive. Be sure to unplug the range or disconnect the power at the breaker box before any repairs are started.

The lower (Bake) element is held in by 2 screws. Remove them and gently pull out the element to remove the power wires connected to the element. These wires are very short and there is not much room in which to work. After having removed the wire connectors one slipped from my fingers and went back in the small opening in the back of the oven where the element is inserted. It took some time to fish out the wire. Not wanting to slide out the range I used some surgical forcepts I happen to have grab the wire ( handy to clip wires or compontents in place for some delicate repairs). Its all blind and the opening is very small plus the insulation must be pushed back to gain access. Anyway I managed to grab the wire, attached both wires to the element, replaced the plate and screws holding the element in place, all finished. Worked great. Other ranges I have owned provided a socket to plug in the element, I guess the bottom line gets in the way of quality.. Being 60 years old the worst part of this job is the getting down on my knees to do the work and getting back up again.
Was this helpful?
Thank you for voting!