EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

911938 Kenmore Range - Overview

Models starting with 911938

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB44K5012
$47.40
In Stock
Bake Element
★★★★★
★★★★★
(82)
Part #WB44K5012
At the floor of your electric oven is the bake element. This partially open-style element comes with push-on terminals. The bake element will likely provide most of the heat for baking. Therefore, if the oven is not heating properly, or if food is burnt on top and undercooked below, your bake element may be at fault. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, use a multi-meter to test for electrical continuity to see if the element needs replacing.
Bake Element - Push On Terminals - 240V – Part Number: WB44T10010
$83.11
In Stock
Bake Element - Push On Terminals - 240V
★★★★★
★★★★★
(141)
Part #WB44T10010
This is an OEM bottom bake element for your oven. Make sure to wait until your oven is cool before replacing this part, and disconnect power to the oven. In order to replace this part, you will need to pull out the oven and open up the back panel to disconnect the bake element wires and install the new ones.
Burner Bowl - 8 Inch – Part Number: WB31T10015
$22.52
In Stock
Burner Bowl - 8 Inch
★★★★★
★★★★★
(31)
Part #WB31T10015
This part is located beneath the element and catches any spills.
Burner Bowl - 6 Inch – Part Number: WB31T10014
$18.22
In Stock
Burner Bowl - 6 Inch
★★★★★
★★★★★
(1)
Part #WB31T10014
This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in diameter. It can be found beneath the element and catches spills. If your old burner bowl is damaged or missing, you may need to replace it with this part.
Surface Burner Terminal Block Kit – Part Number: WB17T10006
$35.80
In Stock
Surface Burner Terminal Block Kit
★★★★★
★★★★★
(28)
Part #WB17T10006
This kit includes the female contact with wires, terminal block and mounting clip.
Surface Burner Switch - 8 Inch - 2500W – Part Number: WB24T10025
$54.95
On Order
Surface Burner Switch - 8 Inch - 2500W
★★★★★
★★★★★
(66)
Part #WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat intensity. The knob to adjust the heat setting mounts on the shaft of this swtich. The burner knob is sold separately. If your large surface element will not turn on, or you cannot adjust the heat intensity, you may have a broken or damaged surface burner switch. Be sure you disconnect your range from the power source before you begin this repair.
Drip Bowl - 6 Inch – Part Number: WB32X107
$21.45
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(27)
Part #WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with rolled, terminal-style plug-in surface element units. The drip bowl is located beneath the surface element, so you will need to remove the element prior to swapping out the old drip bowl for a new one. Many of our customers have rated this repair as easy, and you will not require any tools to complete it. This part is sold individually.
Drip Bowl - 8 Inch – Part Number: WB32X106
$25.75
In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
Part #WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside your range. This 8 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and reattach the element. Make sure the small hole on the bowl lines up with the element socket. Drip bowls are sold separately.
Surface Burner - 8 Inch - 2600W – Part Number: WP660533
$33.69
In Stock
Surface Burner - 8 Inch - 2600W
★★★★★
★★★★★
(21)
Part #WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
Temperature Sensor – Part Number: WB21X22134
$30.53
In Stock
Temperature Sensor
★★★★★
★★★★★
(56)
Part #WB21X22134
The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is having difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. Before you make this repair remember to unplug your range from the power source, and turn off the gas shut off valve.
Light Bulb - 40W – Part Number: 40A15
$21.95
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(10)
Part #40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
CONTROL OVEN TO9 – Part Number: WB27X45466
$152.35
In Stock
CONTROL OVEN TO9
★★★★★
★★★★★
(67)
Part #WB27X45466
This electronic control board is the central component of your wall oven, managing functions such as temperature regulation and heating elements. The manufacturer has modified the wiring on this part, so professional installation may be necessary for proper setup. Before installation, shut off the circuit breaker or unplug the oven for safety. This genuine OEM part ensures optimal oven performance and compatibility with select models.

Exact Part matches for your search term

Warning Label – Part Number: 911938
No Longer Available
Warning Label
This part number matches the current model number 911938
Part #911938

Common Symptoms of models starting with 911938

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element cracked on its own
627 of 638 people found this instruction helpful.
  • Timothy from Cordova, TN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, fl ip breaker back, turn on for a few minutes to make sure it works. Piece of cake.
Was this helpful?
Thank you for voting!
Oven took 30 minutes to get to 380 degrees-no hotter
388 of 392 people found this instruction helpful.
  • Sandra from Hayward, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who ha d already done it. That's the only reason I'm submitting my storey. Thanks
Was this helpful?
Thank you for voting!
Bake Element burned out, bunt like a sparkler.
353 of 377 people found this instruction helpful.
  • Brad from Bedford, KY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Ordered the part on Friday, got it on Saturday, very impressive. Be sure to unplug the range or disconnect the power at the breaker box before any repairs are started.

The lower (Bake) element is held in by 2 screws. Remove them and gently pull out the element to remove the power wires connected to the element. These wires are very short and there is not much room in which to work. After having removed the wire connectors one slipped from my fingers and went back in the small opening in the back of the oven where the element is inserted. It took some time to fish out the wire. Not wanting to slide out the range I used some surgical forcepts I happen to have grab the wire ( handy to clip wires or compontents in place for some delicate repairs). Its all blind and the opening is very small plus the insulation must be pushed back to gain access. Anyway I managed to grab the wire, attached both wires to the element, replaced the plate and screws holding the element in place, all finished. Worked great. Other ranges I have owned provided a socket to plug in the element, I guess the bottom line gets in the way of quality.. Being 60 years old the worst part of this job is the getting down on my knees to do the work and getting back up again.
Was this helpful?
Thank you for voting!