9114242590 Kenmore Cooktop - Parts

This is a drip bowl for your range or cooktop. The drip bowl sits beneath the burner of an electric range and collects any spills that occur while cooking. The bowl is 6 inches in diameter and represents the smaller burner for your range. This product is sold individually and is an authentic OEM part sourced directly from the manufacturer.

The surface element or the coil surface element transfers heat to the area on top of the range. The element is 8 inches in diameter. If your surface element does not heat, overheats, or is inconsistent, replacing this part can be the solution. If you would like to determine whether the element is defective, use a multimeter. Before instal...Read moreling your new element, make sure that the drip bowl is properly aligned with the notch of the pan. Insert new element into the reciprocal at a 40 degree angle. Refer to the instructions provided by the manufacturer for more guidance.

This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned on, it heats up to cook your food. If you turn on the burner and the element does not heat up, it will need to be replaced. To complete this ...Read morerepair, first be sure to disconnect the power from your range, and ensure the burner is cool to the touch. Then, gently remove the burner from the terminals and replace it with the new one. This part is sold individually, and is an OEM part sourced directly from the manufacturer.

Sold Individually.

This medallion is located in the middle of the surface burner.

This is an 8-inch infinite control switch, also known as surface element switch, for a range, oven, or stove. The infinite control switch maintains the heat of your surface burner. Be sure to disconnect power to your range before starting this repair. This part is made of metal and plastic, and is metallic and white in color. This is an O...Read moreEM replacement part sourced directly from the genuine manufacturer. This switch is sold separately. It is recommended to check all four infinite switches in your appliance, if applicable, in case they should be replaced as well. Be sure to disconnect power to your appliance before starting this repair.

This is a surface burner switch. It may also be known as an infinite control switch and it is used in conjunction with your range. The purpose of this part is to control the surface element off and on function. This part is off white in color and is used for the six-inch burner. This model measures to be roughly 2 inches wide, 3 inches lo...Read moreng, and 2 inches thick. For this repair, you will need a Phillips screwdriver, a pair of needle-nose pliers, and a quarter-inch nut driver.