This part is the replacement burner bowl seal or drip pan seal for your range. It is black in color and is sold individually. The burner bowl seal creates a seal between the cooktop and the drip pan and prevents spills from leaking between them. If the seal is broken or worn, it can allow spills to leak under the cooktop. To replace the s...Read moreeal, carefully remove it from under the drip pan, and fit the new seal into place. This is an OEM part sourced directly from the manufacturer.
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip pans needed to be replaced.
18 of 26 peoplefound this instruction helpful.
Steve from Broken Arrow, OK
Really Easy
Less than 15 mins
Screw drivers
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Was this helpful?
Thank you for voting!
Large and small Burner Drip Bowls needed to be replaced
1 personfound this instruction helpful.
Nelda from Carmichael, CA
Very Easy
Less than 15 mins
Pliers, Screw drivers, Socket set
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use
... Read more a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
Removed old rusted screws, removed old drip bowls, removed seals from old drip bowls carefully cleaned seals and replaced them on the new drip bowls. I re-installed the new drip bowls with new stainless steel screws. ( be careful not to tighten the screws to tight )