Models > 9113378816

9113378816 Kenmore Cooktop - Overview

Sections of the 9113378816

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
  In Stock
Screw – Part Number: WB1M1
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$7.76
  In Stock
Burner Bowl  Seal – Part Number: WB32M10
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
  No Longer Available
Gas Pressure Regulator – Part Number: WB19T10078
Gas Pressure Regulator
★★★★★
★★★★★
(2)
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane. This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
  In Stock
Large Burner Drip Bowl – Part Number: WB31M11
Large Burner Drip Bowl
★★★★★
★★★★★
(1)
PartSelect #: PS244366
Manufacturer #: WB31M11
This part is sold individually. It is white on the top side, and black underneath. Used for gas ranges. You may need to order the drip bowl seal.
  No Longer Available
Small Burner Drip Bowl – Part Number: WB31M10
Small Burner Drip Bowl
PartSelect #: PS244365
Manufacturer #: WB31M10
This part is sold individually. It is white on the top side, and black underneath.
  No Longer Available
Large Burner Trim Ring – Part Number: WB7M8
Large Burner Trim Ring
PartSelect #: PS256025
Manufacturer #: WB7M8
This trim ring is white on the top side and black underneath.
$31.37
  Special Order
Screws - Package of 12 – Part Number: WB1X1420D
Screws - Package of 12
PartSelect #: PS234577
Manufacturer #: WB1X1420D
  No Longer Available
Small Burner Trim Ring – Part Number: WB7M9
Small Burner Trim Ring
PartSelect #: PS256026
Manufacturer #: WB7M9
This trim ring is white on the top side and black underneath.
  No Longer Available
Surface Burner Igniter – Part Number: WB13K5058
Surface Burner Igniter
PartSelect #: PS231317
Manufacturer #: WB13K5058
This igniter is used to light the top surface burner on a range/stove. Sold individually.
  No Longer Available
SCREW – Part Number: WB1X1261
SCREW
PartSelect #: PS234510
Manufacturer #: WB1X1261
$11.54
  In Stock
WASHR-PKG 12 – Part Number: WB1X1421D
WASHR-PKG 12
PartSelect #: PS234579
Manufacturer #: WB1X1421D
$13.50
  In Stock

Questions And Answers for 9113378816

Be the first to ask our experts a question about this model!

Common Symptoms of the 9113378816

[Viewing 1 of 1]
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Parts Used:
Burner Bowl Seal
  • Steve from Broken Arrow, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large and small Burner Drip Bowls needed to be replaced
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
Parts Used:
Large Burner Drip Bowl Small Burner Drip Bowl
  • Nelda from Carmichael, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Porcelain chipped around screws
Removed old rusted screws, removed old drip bowls, removed seals from old drip bowls carefully cleaned seals and replaced them on the new drip bowls. I re-installed the new drip bowls with new stainless steel screws. ( be careful not to tighten the screws to tight )
Parts Used:
Large Burner Drip Bowl Small Burner Drip Bowl
  • John T from Cypress, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!