911324 - Parts

The round style oven igniter is also known as an oven bake or broil igniter and is compatible with your range appliance. The function of the round style oven igniter is to pull electrical current through the oven safety valve to open it. If your igniter is glowing for more than ninety seconds but it has not ignited the gas flame, that mea...Read morens that the igniter is not powerful enough to open the valve. Be very careful when handling this igniter as it is very fragile. This igniter has a range of 2.5 to 3.0 amps. Note that this round igniter will not replace flat style igniters.

This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.

Sold Individually.

Sold Individually.

Sold Individually.

This friction wheel, or disc, works in conjunction with a pulley system in your lawn equipment to propel your machine forward. It is a metal disc with a rubber ring around it, has an approximate inside diameter of 2.5 inches, and is commonly mounted onto the axle of your machine. When it is broken, you can visually identify cracks in or m...Read moreissing parts from the part, or excessive wear on the rubber ring. If you do not replace it, your equipment may struggle to move on slippery or uneven surfaces and lose traction. To remove the old friction wheel, start by turning off the engine and disconnecting the spark plug wire. Consult your user manual for instructions on accessing the wheel. You might need a wrench or socket to remove retaining bolts, screws, or clips. Keep in mind that the replacement part is sold individually since your machine may require more than one wheel, and they tend to wear out at the same time.

It is a genuine item that is supplied by the original equipment manufacturer for use with Ariens lawn mowers. This is an important component of the friction wheel assembly. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment functions properly. This high-quality friction ring is made of a d...Read moreurable material and is sold individually. Refer to the owner's manual and the appropriate diagram for your model to ensure the correct repair procedure.

This 21-inch medium-lift mower blade is designed for dependable, all-around cutting performance on walk-behind lawn mowers. Manufactured from durable alloy steel, it provides balanced airflow for clean cutting and efficient clipping discharge across a wide range of grass conditions. Ideal for replacing a worn or dulled blade, it helps res...Read moretore consistent cut quality, smooth mower operation, and a well-finished lawn during regular maintenance.

This rear wheel replacement kit provides parts used to replace a worn or damaged rear wheel setup. Review the kit contents before starting so you know which wheel, hub, axle parts, spacers, or fasteners are supplied. The rear position, tire size, axle opening, hub, offset, and mounting method must match. Check the equipment manual and com...Read morepare the complete original assembly before ordering. Tighten all hardware in the pattern and amount listed in the instructions. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing.

The flange bushing attaches to the speed fork. It is an authentic OEM sourced item which is specially produced for use with Ariens snowblowers and mowers. This part is priced individually. During replacement, it may require a screwdriver and a socket set to help install this part correctly. It will require replacing if it breaks.