This is a replacement drip bowl for your range or oven. The drip bowl sits beneath the burner element and collects any drips or spills. This drip bowl is 8 inches in diameter and is used to replace the large burner drip bowl. This bowl is white on the top and black on the bottom. It is sold individually and is an OEM part from the manufacturer.
This burner bowl, also known as a drip pan, is a legitimate OEM replacement part for your stove. Turn off power to the unit when conducting this repair. You will need to unscrew the existing burner bowl, disconnect the igniter wire, and remove the burner bowl seal before installing the new bowl, and the rest of the parts in reverse order.
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The porcelain had chipped on the burner bowls
14 of 17 peoplefound this instruction helpful.
Paula from Seal Beach, CA
Really Easy
15 - 30 mins
Pliers, Screw drivers
Removed the two screws holding the porcelain burner bowl. Disconected the electric igniter by removing the "w" clip on the underside of the bowl. Then disconnected the igniter from the electric supply cord. Reverse these directions using the new urner bowl. Really easy.
electronic ignitors would not stop firing even when burner was off
12 of 14 peoplefound this instruction helpful.
Jorge from Tulsa, OK
Easy
15 - 30 mins
Screw drivers
first I removed all the srews from the burners that hold the glass cooktop. I then disconected the two wires from the damaged gas valves and replaced them all four with the new ones. After that I put it all togehter and work just fine and celebrated with a good cold beer.
Was this helpful?
Thank you for voting!
Burner bowl worn out from cleaning
5 of 7 peoplefound this instruction helpful.
Leon from Lancaster, CA
Easy
15 - 30 mins
Pliers, Screw drivers
Pulled off burner grates, burner, unscrewed burner bowl, removed clip from igniter and wire, then put it all back together. Was very easy, and the stove looks like new again.
PartSelect is very good with amazing shipment times. The kjpart arrived much sooner than expected.