8975 Bissell Upright Vacuum - Overview

This is a Genuine OEM replacement part designed for use with Bissell Vacuums. This part is made out of Plastic. It consists of a Bracket/Roller and Plastic Wheels. Please note, Brushroll Assembly is Sold Separately. When replacing this part you will need to remove an Access Plate using a Screwdriver. Snap the roller into place, attach Brushroll Assembly and connect the belt to the spindle that turns the belt.

Genuine Bissell replacement belts used on Vacuums. This is the Pack of Two (2) belts. Belts tend to stretch over time, so it is recommended to change them at least every 6 months for optimum performance.

This is an authentic Bissell replacement part manufactured for use with upright vacuums. This filter prevents particulates from entering the air from the vacuum exhaust. This filter can be cleaned and reused, but eventually will need to be replaced as part of normal maintenance. The exhaust filter is sold as and individual replacement part.

This part comes directly from Bissell. The Crevice Tool is used with many models of Bissell vacuums. The Crevice Tool is made of a dense plastic and is used to vacuum out all the hard to reach places where space is limited. This tool is great for corners, folds, and cracks. No tools are needed to attach this tool to the hose. This part sh...Read moreould be replaced if the tip becomes cracked or there is a clog that can't be removed.

This is an authentic Bissell replacement part, sourced from the original manufacturer for use with upright vacuums. The special lamp bulb is commonly used to illuminate the area just in front of the nozzle assembly. This lamp bulb is available as an individual replacement part, please see model diagram for associative parts.

The rocker switch is made out of plastic and metal. It is available as an individual replacement part. This authentic item is supplied directly from the original equipment manufacturer for use with Bissell vacuums. A screwdriver might be helpful during the installation of this part. It will require replacing if it breaks.

This is a Genuine Bissell replacement part that is used on Bissell Upright Vacuums. This Handle Release Lever is made out of Plastic and it is Sold Individually. This is the handle that helps you to lock your vacuum in the upright position. Replacing this item you would need a Screwdriver. • Unscrew and remove the base • Pry the ol...Read mored pedal out of its space and remove it • Simply snap in the new Handle in place • Reattach the base using the same screws

This is an authentic Bissell prefilter that is specially designed for upright vacuums. It is supplied directly from original equipment manufacturer. The purpose of this foam filter is to provide an extra layer of air filtration before it goes into the motor. Please note, the filter tray is sold separately. One filter is included per order. Replacing this filter is extremely easy and it does not require any tools.

This replacement upper tank foam filter is specially designed for Bissell upright vacuums. It is an authentic OEM item, not an aftermarket alternative. Its purpose is to filter out dust and debris. Please note, the housing and the main pleated paper filter is sold separately. No tools needed to replace this filter, simply take out the old filter and replace it with a new one.

This high-quality plastic dirt cup is an OEM part sourced directly from the manufacturer. This item was designed for use in select Bissell upright vacuum cleaners and is used to contain dirt and other contaminants collect while the vacuum is in use. Please make sure to check the manual for your specific model for the correct location and application of this part. This item is sold individually.