8813 - Parts

This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximately 1 1/2 inches long, and has 2 metal prongs called terminals that extend from its body. If your microwave will not turn or heat properly, th...Read moreere could be an issue with the door switch. You can check the switch for continuity using a multi-meter. With the actuator button depressed, you should see continuity between these terminals. If there is no continuity the switch will need to be replaced. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.

This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade gets caught or stuck the force will snap the bolt rather than breaking more expensive parts like the auger transmission. The bolts are sold in ...Read morepairs and include the nuts and washers, the bolt sets are sold as individual sets.

Enhance the effectiveness of your lawn tractor with this 28-inch high-lift blade from Snapper. This unique component is specifically designed for cutting and bagging, ensuring your lawn is trimmed evenly and looks professionally maintained. Notably, this blade's high-lift design aids in making your mowing task smoother and less laborious,...Read more significantly improving your tractor's cutting capability. Despite its robust functionality, installing this part is a breeze. However, it is recommended to wear work gloves during the installation process for added safety. Trust the brand of Snapper to deliver a high-quality, durable blade to keep your lawn looking pristine.

This is a genuine OEM supplied component which is specially made for use with Snapper and Murray mowers. This is the main drive belt for the unit, unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality part is made of durable rubber ...Read moreand is sold individually. Please refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this belt.

This is a genuine OEM sourced replacement v-belt, it is specially produced for use with Murray, Simplicity and Snapper lawn mowers. It is the main deck belt that drives the blades, over time belts tend to wear out and may stretch eventually requiring a replacement. Clean pulleys before installing the new belt to ensure top performance and...Read more longevity with your new belt. Please note this high-quality part is made of durable rubber and is sold individually.

V-belt ha 88.46

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.

This is a genuine OEM replacement accessory. It has been made to fit any Craftsman 2-1/2