8720VB Magic Chef Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cooking elements had come apart and pans did not sit evenly on the burners. Only two of my four burners were usable.
-
Judith L. from Enterprise, AL
- Really Easy
- Less than 15 mins
Replaced the old elements with new ones. So easy and can now cook four things at the same time and none are tipping over!!!!
Other Parts Used:
Was this helpful?
Thank you for voting!
old drip bowl was worn out
-
Richard from Germantown, MD
- Really Easy
- Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
When The Burner Started To Heat (Front) And Then Put The Rice Bag On The Burner. Then The Plastic Bag Began To Burn And The Bag Of Rice Began To Pour Over The Burner. Someone Tried To Clean Up On The Burner But The Burner With Plastic And Hard To Clean The Plastic Off From The Burner.
-
Robert J from Indianapolis, IN
- Really Easy
- Less than 15 mins
Just pull the old out from the stove and put new one on the stove and then tested the burner that is working fine. Thank you very much for order the part. Have a great day.
Was this helpful?
Thank you for voting!
I needed to replace to two 8* drip bowls on the kitchen range
-
Dallas from Arlington, TX
- Really Easy
- Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
Old dirty drip pans
-
gizella from mays landing, NJ
- Really Easy
- Less than 15 mins
Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!
Was this helpful?
Thank you for voting!
one pole of the socket corroded to nothing
-
martien from williamstown, MA
- Easy
- Less than 15 mins
Starting by me making a substitute prong to keep the stove working while the part this coming by mail. was a piece of cake.
Was this helpful?
Thank you for voting!
Porcelan Electric Burner Plug broke
-
John J from Coatesville, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
The video on your website showed me how to take out 1 screw, cut the existing wires and strip the ends. The kit came with 2 porcelan wire nuts to re-connect the wires and it was done. Less than 10 minutes. It saved me $100.00 to get it repaired.I bought 2 in case I need another one in the future.They only cost $11.00 each. Awesome website
... Read more
.
Read less
Was this helpful?
Thank you for voting!
Dirty drip bowl
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
heating coils would not work
-
Adam from Kempner, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver
Remove heat coils, take body of coil inserts out, remove screws from body, cut old receptacle out, tie new recptacle wires to the old piece of left over wires using wire nuts, and reassemble body, insert heating coils and test.
Was this helpful?
Thank you for voting!
Burner did not heat
-
lula from Antelope, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
New receptacle element. I am a girl and I did it.!!!!
Was this helpful?
Thank you for voting!
Not heating
-
Darwin from wisconsin rapids, WI
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Was easy cut the wires of as told to do wire nut the ends together and put back together and tested and worked great. Done
Was this helpful?
Thank you for voting!
replacement of heating element for elec. stove
-
Erica from Ivyland borough, PA
- Really Easy
- Less than 15 mins
plugged it in to the spot where missing element was.
Was this helpful?
Thank you for voting!
Two old Surface Burner Receptacles needed to be replaced.
-
Willis from Anaheim, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I followed the instructions given on your great site. Thank you so much.
Other Parts Used:
Was this helpful?
Thank you for voting!
I wanted to purchase new drip pans, since those that I have are a bit grimy
-
Hedy from Richmond, VA
- Really Easy
- Less than 15 mins
I will begin by saying that not only will I continue to order my parts from PartsSelect, but I also highly recommend this business. If you call Whirlpool be careful that they forward your call for parts to some preferred vendor, which a customer might assume is Whirlpool but it is not. PartsSelect is the same type of business, but wit
... Read more
h outstanding customer service. With regard to the drip pan, Whirlpool had not updated the part number for these as I found out when i called them. Whirlpool no longer uses the drip pans without the holes which is a serious problem since this could be hazardous to the owners of these ranges if you are forced to purchase the drip pans with the holes in them. That said, I ended up keeping my old drip pans, because if you spill grease under the new ones with the holes in them and since the range design with the fan built in on the top does not allow you to lift the top to clean under the pans, you could end up with a grease fire. This is not the fault of PartsSelect and they handled my order in a manner that I would give them a rating of exceptional for customer service.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
The surface burner element burned out on my 20 year old Jenn Air electric stove.
-
Wanda from Riverton, WY
- Really Easy
- Less than 15 mins
It was so easy to order a new one from your company. And it arrived in less than a week! I slipped it into the electric outlet and it worked perfectly. THANKS. Wanda Major
Was this helpful?
Thank you for voting!