First I disconnected the inlet hoses. After lifting up the cover the electrical wires were marked and disconnected from the old valve. Next the short hose from the old valve to the tub was removed. Then the old valve was removed from the washing machine by removal of two mounting screws. The new valve was installed in the reverse orde
... Read morer. New hose clamps were installed on the short hose from the valve to the tub. New washers were installed on the hoses which connected to the valve. A test was made to check for any leaks.
Read less
Was this helpful?
Thank you for voting!
Loss of cold water
8 of 10 peoplefound this instruction helpful.
David from Powell, OH
Easy
30 - 60 mins
Nutdriver, Pliers
Removed the top latches with a nut driver. Removed the washing machine top. Used a nut driver to remove the valve. Used pliers to remove and replace the outlet hose clamp. Used pliers to remove and replace inlet hoses.
I have kept this washer and dryer running for 27 years now by replacing parts. I was going to replace them thi
... Read mores time but for a $20 part they still run ok. I bet I can use the old valve for a garden irrigation project too !
Read less
Was this helpful?
Thank you for voting!
Bad water valve
James from Lewisville, TX
Easy
15 - 30 mins
Screw drivers
Oredered late Friday afternoon. Got part Monday afternoon.thanks