85673 Snapper Lawn Mower - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is secured under the seat to prevent the engine from running without a driver in a seat. Mechanical switches over time tend to wear out requiring replacement. Please note, this plastic switch is sold individually.

Retainer, ring, 3/4

This part is available as an individual replacement part and is made of plastic. The bushing goes between the worm shaft support bracket and the worm shaft. It will need to be replaced if it breaks. A set of pliers might be necessary during the installation of this item. This is a Snapper replacement part directly sourced from the manufacturer for use in snow throwers.

It is a genuine component which is supplied by the original manufacturer. The bushing is specially designed for use with Snapper and Simplicity lawn mowers. It provides a tight fit for the suspension while allowing for movement with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement...Read more. This suspension bushing is made of high-quality material and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure.

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.