This is a single grease filter manufactured for a microwave. The microwave grease filter filters the exhaust air and traps any grease flowing out of the appliance. It is important to keep the filter clean and intact by cleaning it regularly and replacing it when needed. A clogged air filter can cause your appliance to run inefficiently an...Read mored possibly alter the taste and smell of your food. This filter is approximately 7.5 inches wide and 5 inches deep. This part is sold separately. No tools are required for this repair, the filter simply slides in and out using the easy-pull tab on the filter.
This is replacement vent grille or vent grill for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your vent grill is discolored or cracked, or if the mounting brackets for the grill are broken, you may need to replace the grill. This part is made of black plastic and is ap...Read moreproximately 24 inches long and 3.5 inches wide. This product is sold individually.
This is a light bulb and it is a part for your microwave. This bulb uses 30 watts, operates on 125 volts, and is an incandescent lamp. The function of this bulb is to illuminate the surface underneath and inside of your appliance while the door is open, and during a cooking cycle. You will need to replace this part if your door is open an...Read mored the light is not activated. We recommend that you unplug your microwave and leave it inactive for some time before making this repair. Proceed with caution as the capacitors in a microwave can hold dangerous electrical charges for long periods of time even when the appliance has been unplugged.
This is the replacement charcoal filter for your microwave. It is approximately 8 inches by 5 inches. The charcoal filter removes cooking odors from the air that circulate through the microwave vent. You will likely need to replace the charcoal filter if you notice any damage to it, or if it has been in your microwave for a long time. Thi...Read mores part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, an...Read mored replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
This turntable assembly, also known as a rotating ring, is a genuine OEM replacement part for your microwave. It is brown in color and about 10 inches in diameter. This part supports the glass turntable and keeps it in place. Replacing this part is very easy and requires no tools. Simply remove the glass tray, pop out the existing ring and replace with the new one.
This genuine LG Microwave Oven Mounting Bracket Plate is a crucial part for some microwave models. Designed to securely hold the microwave to the wall studs, it enables easy installation above the range. Crafted by LG using high-quality materials, this part promises durability and functionality despite potential variations in appearance. ...Read moreRemember to wear work gloves to protect your hands during installation. It's pertinent to verify that this part fits your model before ordering to ensure compatibility. Trust in the LG brand to deliver high-performing, original equipment manufacturing parts for your appliances.
Discover the Locker Door Latch Housing Assembly, an important part for LG Microwaves. This useful item plays a key role in the operation of your microwave, ensuring the door latches safely and securely. The assembly includes a latch board and door switch, designed meticulously to fit specific models of LG microwaves. This ensures your mic...Read morerowave functions to its optimum level, providing consistency and reliability whenever you use it. Optimize the performance of your LG microwave with this Locker Holder Assembly, crafted with precision and quality in mind. Don't compromise, trust in LG for all your appliance part needs.
This genuine LG microwave oven magnetron is the key component that generates the microwaves needed to heat food efficiently. Designed for a precise fit in many LG models, it converts electrical energy into microwave radiation for fast and even cooking. If your microwave isn’t heating, cooks unevenly, or makes buzzing noises, replacing the...Read more magnetron can restore reliable performance. Built for durability and OEM quality, this part ensures your appliance operates as intended. For installation, always disconnect power and discharge the capacitor to ensure safety.
Discover the essential part for your LG microwave oven: the High Voltage Capacitor. This genuine OEM item from LG is specifically designed for certain models of microwave ovens. The high-quality capacitor is a vital part of the microwave's high-voltage circuit system, storing an electrical charge to support function and performance. But r...Read moreemember, due to safety considerations concerning the high-voltage capacitor's ability to retain a lethal electrical charge even when unplugged, we recommend having this part installed by a qualified service technician. Ensure your appliance operates at peak capacity with this top-notch LG High Voltage Capacitor. Please confirm if this capacitor is suitable for your specific microwave model before purchasing.
This microwave door frame assembly forms the inner structural support of the door, securely holding the glass, gasket, and latch components in proper alignment. It plays an important role in ensuring the door closes correctly so the microwave can operate safely and start as intended. Replacement is commonly needed when the inner frame bec...Read moreomes cracked, warped, or damaged, which can lead to loose doors, door-related error messages, or the unit failing to run, and installing a new frame helps restore reliable door function and normal operation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Vent Grille tabs snapped off
18 of 27 peoplefound this instruction helpful.
Andy from PERRYSBURG, OH
Really Easy
30 - 60 mins
Screw drivers
Repair was easy but you have to remove the screw at the top of the microwave (top left) in order to secure the far left tab with the hole in the tab. Place the grille in place, push to the left and then secure the screw you removed. Just remember that the mounted screw will need to be removed the next time you need access in order to repl
... Read moreace the charcoal filter.
Read less
Was this helpful?
Thank you for voting!
One of the switches in a component that door activates when shut.
9 of 11 peoplefound this instruction helpful.
Jimmy from OZARK, MO
Easy
30 - 60 mins
Pliers, Screw drivers
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
Was this helpful?
Thank you for voting!
would not start.
8 of 10 peoplefound this instruction helpful.
James from VIRGINIA BCH, VA
Really Easy
30 - 60 mins
Screw drivers
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.